Tag Archives: commercial appliance repair

Glass Washer Repair: How To Save Energy And Repair Your Glass Washer

If you have a restaurant or bar you need to keep the glasses clean. To make it possible you need to have a fully functioning glass washer. For the glass washer to continue working effectively you need to take good care of it:

How to save energy with your glass washer

The cost of electricity has been on an upward trend. To reduce your power bill take measures that save you energy. One of the ways recommended by commercial appliances repair professionals is investing in a pre-rinse unit if you don’t already have one. The pre-rinse not only saves you energy, it also reduces blockage incidences; therefore, you don’t have to hire a repair professional every now and then.

Another way of saving energy is always running a full load. This way you clean plenty of glasses in one go thus saving you plenty of money. If you are located in a hard water area, you should regenerate your water softener 2-3 times a week. Your machine will consume plenty of energy if it has the wrong settings. If you have noticed that your energy bill is rising every day, you should check the settings. For ideal results, ensure that the rinse pressure is set between10-15 pounds per square inch. The wash tank should be set at 160ºF and booster heater at 180ºF. The hot water heater should be set at 140ºF.

Common glass washer problems and how to fix them

Just like any kitchen appliance, it’s common for the glass washer to develop problems. While it’s recommended that you hire a glass washer repair professional to fix the appliance when it develops problems, not all problems require the attention of a professional—there are some that you can fix on your own.

White film on the glasses: If there is a white film on your glasses, this is usually due to hard water minerals. To fix the problem you need to regenerate the water softener more often. For ideal results, you should regenerate the water softener at least twice a week.

Glass washer not heating up: This is a common problem when the heating element, thermostat or both are faulty. You should check the multimeter for 115/220 V if this is the voltage there and replace the heating element. If you can’t get any measurements consider replacing the thermostat.

Conclusion

This is what you need to know about the glass washer. If there is a problem that you can’t fix, ask a commercial kitchen appliance Arlington to have a look at it.

Commercial Dishwasher Repairs: Taking A Look At The Common Dishwasher Problems

commercial dishwasher

As a hotel or restaurant owner, a dishwasher is of paramount importance to you. While you may want it to be in perfect condition the entire year, this is usually not possible as it tends to develop problems every now and then. Here are some of the common dishwasher problems and how to fix them:

The dishwasher doesn’t clean well

The reason why you installed the unit is because you want it to clean your dishes. If it doesn’t clean them properly there is no point of having it. According to commercial kitchen appliance repairs professionals, the main reason for this is because the dishwasher is dirty. You should check the strain screen, door gasket and sprayer arms for grease, debris, and food particles. If dirty, clean them. If the spray arm is worn out, replace it.

Kitchen appliance professionals also report that the dishwasher can fail to give you ideal results if the detergent you are using is too old. If the detergent has been sitting in the cabinet for months you should consider replacing it.

There is Water at the bottom of the dishwasher

This is a common problem if you have used the dishwasher for only a few times. The problem results due to clogging of the drain. The drains can be blocked by foils, chicken bones, and other items. For the water to go away you need to unclog the drains. You can unclog the drains by yourself or hire a drain contractor. To prevent the problem from happening again always clear off all the items before putting the dishes in the unit.

The dishwasher has an awful smell

If there is always an awful smell after you are done with cleaning the dishes, it means that there are food particles and grease trapped in the dishwasher. The particles are usually located in the strainer screen. You should clean these areas then run a full cycle without dishes.

The dishwasher doesn’t start

If your unit can’t start, commercial appliances service providers recommend that you start looking at the fuses and circuit breakers and ensure that they haven’t blown or tripped. Also, ensure that the dishwasher is plugged in properly. Professionals also recommend that you look at the door latch and ensure that it isn’t faulty. If you have tried everything and the unit doesn’t start, you should consider contacting a commercial appliances repair Fairfax to take a look at it.

Commercial Microwave Oven Repair: Common Microwave Oven Problems

commercial microwave oven repair

A microwave oven is an important device to have in your workplace. Just like any other appliance, the microwave also develops problems that must be fixed for you to continue using it. To help you out, here are the common microwave oven problems and how to fix them:

Failure of the microwave to switch on

The first thing that you should do when this happens is to check the plug. Ensure that the plug is plugged in properly. Also ensure that the door is correctly closed and aligned. Also check the fuses and confirm if they have blown. Commercial microwave oven service providers recommend that you also check on the circuit breaker and ensure that it hasn’t tripped.

Microwave cooks unevenly or slowly

Check on the voltage at the power supply and if it’s more than 115 Volts, it’s the cause of the problem. If it’s less than 115 volts, the oven is faulty. A bad motor has also been shown to cause the problem. To take a look at the motor remove the grill at the bottom and check it using a voltmeter. If the reading is infinity, you should replace it.

Sparks inside the microwave

It’s common for grease and food stuck in the oven to create occasional sparks especially during the high-energy cycle. Commercial oven repair professional also report that a malfunctioning stirrer can cause sparks. To fix the problem you have to open the exterior panel of the unit in order to view the interior mechanical workings of the oven. If the stirrer’s belt is loose or doesn’t retain its tension, install a new one.

Mechanical problems in the oven

There are a number of mechanical problems that can come about in the oven. One of the common is burning of bulbs. To fix the problem refer to a manual and identify the exact location of the burnt bulb and fix it. If it doesn’t light, ask a commercial appliances service provider to come and take a look.

The microwave’s turntable can also fail to rotate. Built-up food debris often prevents the turntable from turning. The drive bushing may also have cracked. The problem is also common when the turntable motor fails. If you have the skills, go ahead and fix the problem, but if you have never repaired a microwave before, let commercial oven repairs Fairfax professionals handle it. For peace of mind, ensure that the professionals are certified and experienced enough.

Commercial Appliances Service: Golden Tips On How To Make Your Appliances Last Longer

commercial appliance service

Appliances are a major investment; therefore when you buy them you want them to last as long as possible. According to commercial appliances repair professionals, there are a number of ways in which you can help your appliances last for long. Here are some of the ways:

Commercial refrigerators that last

If you have a refrigerator in your place of work you should take care of it. One of the major problems with refrigerators is doors. Due to the constant opening and closing the door seals wear out thus the refrigerator doesn’t cool food the way it’s supposed to. In addition to regularly cleaning the door seals also replace them when they wear out.

To improve air flow in the refrigerator, clean the refrigerator base grill. If your unit has a built-in ice/water dispenser, clean it too. Professionals recommend that you remove and clean drip tray every two or three months. Also clean the ice bucket assembly once a month. This is to prevent ice from picking up the refrigerator odors.

Washing machine that keeps on washing

There are a number of ways of to make your washing machine last longer. One of the ways is regularly cleaning or replacing air filters. These are units that trap water sediment before it enters the machine. By regularly cleaning and replacing air filters you prevent food particles, seeds, pits and other products from building up and getting trapped there resulting to inefficiency of the unit.

Another way of keeping the washing machine working efficiently for long is avoiding overloading them. Regardless of how fast you want to complete laundry, always ensure that you don’t exceed the recommended maximum.  You should also leave the washing machine door open after completing your load of laundry. This is to allow air to circulate in the washer and prevent mold and mildew from growing inside the unit.

Dryers that keep on drying

To keep the dryers in top performing levels, keep the exhaust vent clean. For ideal results, clean it at least once a year. You can clean it on your own or hire commercial appliance services Vienna. It’s also recommended that you regularly inspect the exterior vent and ensure that hot air is coming from it.

Conclusion

These are tips on how to make your appliances last for long. When any of the appliances develops a problem, hire a professional to come fix commercial appliance  as soon as possible.

Water Heater Repair: Taking A Look At The Common Water Heater Problems And How To Fix Them

water heater repair

A water heater is an integral part of your business. Whether you have a tankless, tank-type or solar type water heating system, the system will at one point develop problems. Here are common water heater problems and how to fix them:

Sediment build-up in the water tank

If you have a tank-type system you will often have this problem especially if you stay for long before you hiring a commercial appliances service provider to clean the system for you. There are a number of problems that come about due to excessive sediment build up. One of the problems is rotten egg smell in the water. This is awful as it reduces the chances of you getting repeat customers.

Excessive sediment build up also reduces the amount of water in the tank as the sediment takes up space.  Since most water heater burners are located at the bottom of the tank, debris buildup makes the water heater less effective thus water doesn’t heat as it should. To fix this problem you need to flush the tank to get rid of the excess sediment. You can do the work by yourself or hire a professional to do it for you.

Water heater temperature issues

If the water heater isn’t heating water well enough it could be because you haven’t set the thermostat correctly. Raise or lower the temperature a few degrees and the system will resume working effectively. If the water isn’t getting hot at all, the heating element could be spoilt and you have to replace it. The problem could also be as a result of a non-functioning thermocouple. If you have the necessary skills, you can fix the appliance or hire a professional to help you out.

Water tank noise problems

There is nothing as annoying as noisy water heater. Noise comes about when sediment build up in the tank comes into contact with the heating element. You hear noise when the heating element is burning the sediment away.  The water heater can also make noise when the heating element is on the verge of burning out.

Fixing this problem is easy as all you need to do is to flush the tank in order to get rid of the sediment. If you have already flushed the tank and still the tank makes noises, hire a water heater repair professional to replace the heating element. If you have the skills you can replace it yourself.

Conclusion

Sometimes the problems are due to old age of the appliance. If your water heater is more than 10 years old, it’s time to replace it as no repair work with fix the problems. All you need to do is to hire a commercial appliances repair Alexandria professional to do the work.

 

Water Heater Repair: Tips On How To Lower Your Water Heating Bills

water-heater-repair

If you have a hotel or guest house you need a water heater for the guests to enjoy hot showers. While a water heater provides comfort, it consumes plenty of power and your electricity bills can skyrocket if you don’t take measures to control it. To guide you here are measures that you can take to save your water heating bills:

Turn down the thermostat

Water heaters come preset at 140 degrees. While the water is comfortable for bathing to some at this temperature, it can be scalding to others. To reduce the risk of scalding and giving your business a bad name, lower the temperature to 120 degrees.

This temperature is high enough for the guests to enjoy a nice bath and at the same time reduce mineral buildup in the pipes and tank.

It’s easy to lower the thermostat, but if you are not comfortable with your skills, hire commercial appliances repair Fairfax to help you out.

Install low-flow showerheads

Showerheads not only reduce the amount of water that the guests use, they also save on your water bill. According to water heater repair professionals, when you install showerheads you reduce water consumption by up to 60%. You also cut your water heating bill by up to 20%.

When buying the showerheads buy them from a reputable store. Also have them installed by an experienced expert.

Drain the sediment

Just like in any other appliances, sediment reduces the efficiency of your water heater. To keep the tank running efficiently you need to drain it. You can hire a repair contractor to do the work, but if you don’t have money, do the work by yourself.

To drain the sediment you need to turn off water and power to the water heater tank and then connect a garden hose to the base of the tank. You should then let the water run out together with the sediment.

Insulate exposed water pipes

Plenty of heat is lost through exposed water pipes. Commercial appliances service providers have been able to show that by insulating exposed water pipes, water arrives in the water heater 1-2 degrees warmer.

This not only saves you time that you would have waited for the water to get warm, it also saves you energy that you would have used heating the water. All you need to do is to hire a water heater contractor to insulate the pipes. For long term service use high quality insulating material.

 

Commercial Kitchen Appliance Service: Guide To Buying Kitchen Appliances

kitchen appliances

Are you planning of buying any kitchen appliance?  There are a number of factors that you need to consider for you to buy the right appliance. Here are some of the factors that you should consider:
Shared tasks

To avoid buying so many appliances thus spending a lot of money you should go for appliances that can serve more than one task. For example, you should go for a large refrigerator that you will not only use in cooling your food, but also used it in making ice.

Not having many kitchen equipments has been shown to reduce accidents in the kitchen. You also lower the cost of kitchen appliance repair.

Safety

Kitchen appliance contractors recommend that you should place safety over style when buying kitchen appliances. You should go for appliances that don’t pose danger to your and other family members.

One of the things that you should consider is the material used in making the appliance. If you are buying a knife you should go for one made from non-slip materials such as silicone.

You should also consider the length of the kitchen appliance. Commercial kitchen appliance service providers recommend that you go for an appliance that is as long as possible in order to avoid burning yourself. If you are buying tongs you should go for those that are at least 12 inches long.

Where possible you should go for cordless appliances in order to avoid accidents resulting from short circuit.

Ease of use

There is no one who likes complex appliances. As rule of thumb you should ensure that the appliance you buy can be used by every member of the house.

Modern electric home appliances come with complex operation requirements which can be difficult to follow. If most of your staff is computer illiterate you avoid these appliances as they put your property at the risk of fire in the event a staff member uses them wrongly.

After sale service

There are some companies that offer after sale services to some appliances such as refrigerators. This not only gives you peace of mind as you know that you have a place to run to in the event your appliance develops problems, you also save a lot of money that you would have spent hiring a home appliance repair contractor. To save money and have peace of mind you should buy from a company offering the services.

 

Commercial Dishwasher Repair: Tips On How To Maintain Your Dishwasher

com0001

A dishwasher is an important appliance in your home and you should take good care of it for it to last for long and avoid hiring a dishwasher contractor Arlington every now and then. To help you out here are tips on how to take good care of your appliance:

Clean it regularly

Many homeowners feel that the dishwasher is always clean as you are always cleaning the dishes there, but that’s not the case. Just like any other appliance in your home the dishwasher gets dirty and you have to clean it to retain its efficiency.

The best way of cleaning the appliance is using hot water. You should heat hot water and pour it into the dishwasher before you wash the dishes. For ideal results you should set the thermostat to 50 degrees. If water is cooler than this temperature it’s not ideal for cleaning. On the other hand if the water is hotter than this it may scald you.

In addition to using hot water it’s also wise that you use vinegar. You should put 2 cups of vinegar at the bottom of the appliance and rut it on low setting.

Schedule regular Inspection

Even if your appliance is working efficiently it’s wise that you hire a commercial dishwasher contractor to inspect the machine on a regular basis. For example, you can get into contract with the professional and the professional be inspecting the machine once every six months.

When the contractor visits he/she should inspect all areas and ensure that they performing at their best. In addition to inspection, the professional should also clean the appliance and fix any faulty areas.

Use the machine

Many homeowners don’t use their dishwashers on a regular basis. This puts the machines at the risk of accumulating food and other debris. To avoid this you should use your machine every now and then. Even if you won’t clean the dishes there, you should run a short cycle and you will get rid of debris.

If you have stayed for a long time without using the machine and you want to start using it, you should first hire a commercial dishwasher repairs professional to inspect the machine and give you a go ahead. This is to avoid infecting your dishes with bacteria. You also protect your dishes from getting damaged.

Conclusion

By considering these dish washer maintenance tips you will not only have an efficiently working machine, you will also have a machine that saves you energy and money.

Walk In Cooler Repair: Common Water Cooler Problems And How To Fix Them

appliance-repair-5

A water cooler has become a must have in homes and offices. Although, the units work with very few problems and without requiring plumbing modifications, they sometimes develop problems that need to be addressed. Here are some of the most common water cooler problems:

Failure of water to get cold

The sole purpose of buying a water cooler is to cool water; therefore, if the water isn’t getting cold there must be a problem. This problem comes about when the unit isn’t plugged into a wall socket. The problem will also present itself when the mains power switch isn’t turned on.

Before you call a water cooler technician Arlington you should first check whether you have turned on the power to the cooler. You should also check whether the cooler switch is on and illuminated.

No water is coming out

This happens when the sprout is blocked by debris or minerals. To fix the problem you should clean the water cooler dispenser. If you clean the dispenser and the water won’t come out you should ask a commercial appliance contractor to take a look at the cooler.

Water cooler is leaking

Water leaks are common with water coolers. The leakages present themselves in different ways. For example, the water may leak from the unit and form a puddle on the floor. When this happens, the leaks are as a result of a leaking water bottle and not from the cooler itself.

In most of the cases, the bottle may have been cracked thus altering the pressure within the cooler. The pressure change draws water into the tank causing an overflow.

To correct the problem you should remove the bottle from the cooler and test the cooler with a different bottle. If the leaking continues you should call a walk-in cooler repair professional to take a look at it.

Sometimes the leakages result from the tap. When this happens, it’s usually an issue with the tightness of the faucets. Sometimes the issue is related to the parts inside the taps.

Conclusion

Water coolers develop problems every now and then. The cool thing is that most of the problems are minor and you can repair them on your own. If you have tried fixing the issues and still the problems won’t go away, you should hire an appliance contractor to take a look at your unit

How To Save Energy And Money With Your Refrigerator

appliance repiar

The fact that you need cool food and drinks doesn’t mean that you should spend an arm and leg on it, does it? Thankfully, there are several tips given by refrigerator repair professionals on how to save as much energy and money on your appliance as possible. Which are these tips? Here they are:

Get rid of your old refrigerator

If your fridge consumes too much energy and is more than ten years old, it might be due to its old age.

If you can’t remember when you purchased your refrigerator, you should consider getting a new, more energy-efficient one.

Yes, the new unit will set you back a tidy sum, but it will save you a lot in the long run.

When buying a new appliance, pay attention to the energy star rating and always go for the appliance with the highest rating.

Practice the 2/3rds full rule

As you can tell, the fridge consumes energy when it’s working to replace the lost, cold air. To make it easy for the fridge, use the 2/3rds full rule. Here you keep the refrigerator and freezer at least 2/3 full. This means that you have less than 1/3 of the unit empty, so only 1/3 of cold air can leak out.

Although you should always observe the rule, putting it into consideration is more important if you have a large family and you keep opening the door to reach for food.

Ensure your unit has enough air supply

Where you place your fridge significantly impacts how it functions efficiently. For example, if you place it next to a heat source such as a radiator, hob, or oven, it will run more frequently, which means it consumes more energy than it should.

To ensure that your unit is in top working condition all the time, ensure that there is sufficient air moving around. This calls for you to place it away from heat-producing appliances. You also should avoid placing it too close to the wall.

If you visit many homes, you will find many homeowners placing items on their fridges. As much as this brings convenience, it often makes the fridge work harder to get rid of hot air caused by these items.

For your unit to run efficiently, get rid of any products you might have placed on it.

Keep an eye on frost in your unit.

Plenty of frost in your freezer will make your unit work hard, which, as mentioned above, translates to high-energy consumption. To cut on the amount of money you spend on your monthly energy bill, regularly inspect your freezer and if the frost is ¼” or thicker, thaw it out.

Reduce the frequency you open the day.

As we have said, you have a large energy bill at the end of every month due to cold air escaping your fridge, often through the door.

To keep as much cold air inside, reduce the frequency at which you open the door. The right way to go about it is to take all the things you need from the fridge at once.

If you live with other people in the house, let them know about the benefits of minimizing the frequency of opening the door and encourage them to keep the door closed at all times.

Even when you open the door, don’t leave it open for too long as you will lose too much cold air. Instead, reach for what you need as fast as possible and close the door.

Only store cold food in the fridge

Some people try to cool their food by placing it in the fridge while still hot. While this might work, it often leads to the refrigerator overworking to cool the food.

Even if you are looking to experiment, appliance repair Springfield professionals significantly advise against placing hot food in the fridge. Even if you want to store the food in the refrigerator for later, let it first cool completely to room temperature before placing it inside the appliance.