As a hotel or restaurant owner, a dishwasher is of paramount importance to you. While you may want it to be in perfect condition the entire year, this is usually not possible as it tends to develop problems every now and then. Here are some of the common dishwasher problems and how to fix them:

The dishwasher doesn’t clean well

The reason why you installed the unit is because you want it to clean your dishes. If it doesn’t clean them properly there is no point of having it. According to commercial kitchen appliance repairs professionals, the main reason for this is because the dishwasher is dirty. You should check the strain screen, door gasket and sprayer arms for grease, debris, and food particles. If dirty, clean them. If the spray arm is worn out, replace it.

Kitchen appliance professionals also report that the dishwasher can fail to give you ideal results if the detergent you are using is too old. If the detergent has been sitting in the cabinet for months you should consider replacing it.

There is Water at the bottom of the dishwasher

This is a common problem if you have used the dishwasher for only a few times. The problem results due to clogging of the drain. The drains can be blocked by foils, chicken bones, and other items. For the water to go away you need to unclog the drains. You can unclog the drains by yourself or hire a drain contractor. To prevent the problem from happening again always clear off all the items before putting the dishes in the unit.

The dishwasher has an awful smell

If there is always an awful smell after you are done with cleaning the dishes, it means that there are food particles and grease trapped in the dishwasher. The particles are usually located in the strainer screen. You should clean these areas then run a full cycle without dishes.

The dishwasher doesn’t start

If your unit can’t start, commercial appliances service providers recommend that you start looking at the fuses and circuit breakers and ensure that they haven’t blown or tripped. Also, ensure that the dishwasher is plugged in properly. Professionals also recommend that you look at the door latch and ensure that it isn’t faulty. If you have tried everything and the unit doesn’t start, you should consider contacting a commercial appliances repair Fairfax to take a look at it.