Tag Archives: glass washer repair

Glass Washer Repair: 4 Common Problems With Glass Washers

Glass washer repair

Just like any other appliances in your place of work, glass washers also develop problems. Here are some of the common problems as observed by glass washer repair professionals.

Plenty of water on the glasses

This happens when you don’t load the glasses properly. When you put glasses in the glass washer, the unit should not only clean the glasses, it should also rinse them. For water to be fully rinsed off you have to position the glasses in a way that you allow the water to run off. If you are properly placing the glasses but they are still not getting rinsed, chances are that you have a faulty heating element. You should hire a kitchen appliance technician to inspect the unit and fix it.

Poor glass cleaning

If you notice that the glasses are not getting clean as they should, the problem could be with the dishwashing liquid that you are using. The liquid could be weak. The solution to this problem is using a strong dishwashing liquid.

Food around the filter

A dirty filter results to dirty glasses. To keep your glasses clean, commercial kitchen appliance service providers recommend that you clean the filters regularly. To prevent food from being added to the filter you should scrape as much food particles from the glasses as you can.  Kitchen appliance professionals also report that how you clean the glass washers has a great impact on the condition of the filters. To be on the safe side only use normal and auto wash cycles when cleaning. To keep the filter clean, use a dishwasher cleaner when cleaning your unit.

Cloudy Glassware

There are many factors that will give your glasses a cloudy look. Two of the most common factors are limestone deposits and corrosion of the glasses. If there are limestone deposits you should add limestone remover in the water.  To tell whether your glasses are corroding, you should undertake the vinegar test. If you do the test and the glass is still cloudy, then the glasses are suffering from surface corrosion. If the glass is not cloudy after the test, the problem is due to hard water. You should check the water hardness and adjust the rinse aid setting in your unit.

Conclusion

You can fix some of the dishwasher problems on your own but if the problems are complex you should hire commercial appliance services Vienna to help you with the work.

Glass Washer Repair: How To Save Energy And Repair Your Glass Washer

If you have a restaurant or bar you need to keep the glasses clean. To make it possible you need to have a fully functioning glass washer. For the glass washer to continue working effectively you need to take good care of it:

How to save energy with your glass washer

The cost of electricity has been on an upward trend. To reduce your power bill take measures that save you energy. One of the ways recommended by commercial appliances repair professionals is investing in a pre-rinse unit if you don’t already have one. The pre-rinse not only saves you energy, it also reduces blockage incidences; therefore, you don’t have to hire a repair professional every now and then.

Another way of saving energy is always running a full load. This way you clean plenty of glasses in one go thus saving you plenty of money. If you are located in a hard water area, you should regenerate your water softener 2-3 times a week. Your machine will consume plenty of energy if it has the wrong settings. If you have noticed that your energy bill is rising every day, you should check the settings. For ideal results, ensure that the rinse pressure is set between10-15 pounds per square inch. The wash tank should be set at 160ºF and booster heater at 180ºF. The hot water heater should be set at 140ºF.

Common glass washer problems and how to fix them

Just like any kitchen appliance, it’s common for the glass washer to develop problems. While it’s recommended that you hire a glass washer repair professional to fix the appliance when it develops problems, not all problems require the attention of a professional—there are some that you can fix on your own.

White film on the glasses: If there is a white film on your glasses, this is usually due to hard water minerals. To fix the problem you need to regenerate the water softener more often. For ideal results, you should regenerate the water softener at least twice a week.

Glass washer not heating up: This is a common problem when the heating element, thermostat or both are faulty. You should check the multimeter for 115/220 V if this is the voltage there and replace the heating element. If you can’t get any measurements consider replacing the thermostat.

Conclusion

This is what you need to know about the glass washer. If there is a problem that you can’t fix, ask a commercial kitchen appliance Arlington to have a look at it.