Tag Archives: appliance expert

Dishwasher Repair: Tips On How To Properly Load The Dishwasher

For you to properly clean the dishes, you have to load them properly in the dishwasher. Here are tips on how to go about it as given by dishwasher repair professionals:

Loading the top rack

The top rack is designed for glasses, cups, saucers, and smaller items. Place the items at an angle with the dirtiest surface facing downward. To prevent the dishes from chipping or getting damaged, ensure similar items don’t touch.

Place lightweight and dishwasher-safe plastic items such as storage containers on the top rack. If including any household items you can clean in the dishwasher, keep them on the top rack. Place them away from high temperatures of the drying element in the bottom of the appliance.

Ensure the plastic items you place in the dishwasher rack aren’t too small to fit through gaps. This is because items that can fall through the gaps can block one of the washer arms or land on the dishwasher’s heating element and get burnt.

Does your appliance have a fold-down shelf with stemware holders? Secure the stems of wine glasses and champagne flutes in the holders for extra protection during washing.

Some dishwasher models have flexible spray nozzles on the upper rack where you can place tall glasses and water bottles.

Got long utensils such as ladles and spatulas? Lay them flat on the upper dishwasher rack. Ensure the utensils can slip through the rack and block the spray arms.

Loading the bottom rack

The bottom rack is the ideal spot for plates, pans, bakeware, instant pot inner pots, and casserole dishes. Place dinner and lunch plates between the tines on the bottom rack and angle the dirty sides towards the washer jets.

Watch you don’t stack the dishes on top of each other as this will cause nesting and prevent the dishes from getting clean evenly. You can avoid nesting by alternating larger and smaller plates.

Position large bowls between tines or along the side, back, or front of the bottom rack. Face the inside of each bowl towards the center of the dishwasher and angle them downwards.

If you have larger cookware items such as pans, pots, and baking dishes, place them along the sides or back of the lower rack. Angle them down to ensure better cleaning and drainage.

Place flat pans and platters on the side or back of the lower rack away from the dishwasher door. Avoid placing them in the front door as you can block detergents from reaching the dishes.

Loading the silverware

The key to ensuring the silverware get clean is to ensure the water reaches the entire surface area. Don’t place forks or spoons in one section unless you alternate the direction. Load the silverware into the silverware basket while taking care to avoid nesting when loading, as this can cause some of the utensils to clean inefficiently.

To protect your fingers and hands when loading, place knives with the handles facing up. For the spoons and forks, place them with the handles facing down.

If your silverware baskets have lids, take care as they might flip up if the handles don’t fit into the slots in the lids.

Once everything is in place, fill the detergent dispense to the necessary level based on how hard the water is in your area.

Tips for getting excellent results from your dishwasher

For clean dishes all the time, clean the dishwasher regularly.

Use the correct amount of dishwasher detergent. As mentioned above, this will depend on how hard the water is. If the water contains a lot of minerals, use more detergent for every load.

Ensure that the detergent is fresh and not clumping. Give the liquids a good shake before you use them. This will break any lumps in powdered formulas leaving you with easy to use detergent.

Watch what you place in the dishwasher. Some items, such as cast iron and ceramic-coated cookware, should never see the insides of the dishwasher. This is because they will get damaged, and you can’t restore them.

At least once a year, hire an appliance repair Springfield professional to inspect your appliance and ensure all the parts are functioning optimally. If they have a problem, the professional should fix it immediately before it gets worse.

8 Benefits Of Hiring Commercial Appliance Repair Pros

commercial appliance repair

When your appliances develop problems, you have two options. Repair them by yourself or hire a commercial appliance repair professional to help you out. It’s always wise to hire a pro to help you out. While you will spend money to hire the pros, they come with plenty of benefits that include:

You have peace of mind

When you know that the work is being handled by a professional, you have peace of mind as you know that everything will be perfect. This isn’t the case when you repair the unit by yourself. Since you aren’t experienced, you are just guessing where the problem could be.

Even when you are the one handling everything, you aren’t sure the unit will continue functioning as well as it should.

You save money

While you spend money to hire the repair professional, you end up saving a lot in the long run. As mentioned above, since you aren’t an expert, you guess where the problem could be. In most cases, you end up causing more damage to the appliance.

When the problem comes back after a short while, you have to hire a repair professional to help you out. Since the problem is more significant than was there originally, you end up paying the repair professional more than you would have in the first place.

When you hire the repair professional the first time appliance problems show up, you end up saving a lot of money.

You save time

It goes without saying that for you to repair the appliance, you have to invest your time. When you hire a repair professional, you don’t spend your time on the broken appliance. You concentrate on your work where you make more money.

You can also choose to spend time with your family or handle tasks around the house.

You get a warranty

When your appliance breaks down after a few days of repair, you have to repair it again by yourself, which is more time spent repairing an appliance you had already repaired. In some cases, you end up spending more money to buy more parts.

When you hire an expert repair technician, you get a warranty on the repairs so that when the unit breaks down again, the professional takes care of it without costing you extra.

The contractors use the right tools

Sometimes appliances develop problems that require specialized tools that most homeowners don’t have in their garages. If you have a modern appliance, you need a wide range of digital tools to repair it.

When you try fixing the appliance by yourself, you won’t repair it properly as you don’t have the necessary repair tools. This results in more problems than were originally there.

When you hire a licensed professional, you can sit back and have peace of mind knowing that they will get the work expertly done as they have the necessary tools to repair any appliance you might be having.

You fix the problem once and for all

Since they have the expertise and right tools to do the work, they can fix the appliance problem once. This isn’t the case when you try fixing it by yourself, where you do it a few times.

Since the professionals fix the problem once and for all, they save you money as you don’t have to keep on hiring a repair expert. You also continue enjoying your appliance without worrying that the unit will break down in the middle of a task.

You protect the appliance warranty

If your appliance is new and still under warranty, attempting to repair it by yourself puts you at the risk of voiding the warranty in the event something goes wrong. Licensed pros, on the other hand, help you in protecting the warranty. Since they are licensed, you can easily get a replacement appliance even if the unit stops working.

To protect yourself, ensure that the repair professional you hire is experienced enough and has all the necessary certifications.

The professionals bring about convenience

When you are having problems with your appliance, you only need to reach out to the appliance repair Springfield technicians and ask them to visit your home and repair the appliance. As mentioned above, when hiring the professionals, ensure they are certified and experienced enough.

Appliance Repair: 7 Reasons Your Fridge Isn’t Cooling Food

One of the major problems with refrigerators is failure to cool food. According to appliance repair professionals, the problem comes about due to many reasons that include:

Failure to plug in the refrigerator

you or someone else might have mistakenly unplugged the fridge. since there is no power reaching the refrigerator, it doesn’t cool food. Before you rush to a conclusion the appliance is faulty, check whether the refrigerator is properly plugged in. To fix the problem, you only need to plug in the appliance and continue cooling your food.

Improperly set thermostat

The fridge might also fail to cool food when the thermostat isn’t correctly set at the right temperature. If the appliance is plugged in but not working, check the thermostat. If you have a side-by-side freezer, the thermostat is most likely located at the back. On the other hand, if you have an over-under fridge, the thermostat is located under the refrigerator.

Locate the thermostat and check the temperature settings. You should then adjust it accordingly.

You have a problem with the compressor

From its name, the compressor compresses and pushes refrigerant vapor into the coils outside the refrigerator. The pressure and pushing create heat that forms hot gas that later cools and absorbs heat from the fridge and freezer.

If the freezer fan is running, but the fridge isn’t getting cold, the compressor might be the problem. The compressor is located behind the refrigerator and at the bottom. To access it, pull the refrigerator away from the wall.

To fix the problem, get a new compressor relay then test it with the current compressor. If the problem is with the compressor, you have to replace it. Connect the new appliance to the suction line, process line, and discharge line.

Problem with the evaporator fan

The evaporator fan blows cool air you feel when you open the refrigerator door. The fan pulls air across the evaporator coil, cools it, and then pushes it across the freezer and refrigerator. If the evaporator doesn’t work at the same time as the compressor, it won’t produce cool air.

The evaporator fan is located behind the freezer wall. You need to empty the contents of the freezer and shelving before you access it.

In most cases, if the fan isn’t working, you have a problem with the motor. Install a new motor then insert fan blades. You can do the work by yourself if you have the skills, but if you have never done it before, let an expert handle it.

Presence of a lot of food

If you have plenty of food boxes blocking the vents, cool air won’t circulate the fridge as well as it should. To fix the problem, organize the fridge or get rid of any food that could be blocking airflow and preventing the refrigerator from cooling.

This is easy to do, and you don’t even need a professional to help you out.

Problem with the condenser fan

The role of the condenser fan is to cool the compressor and condenser coils. In a properly functioning refrigerator, the fan should run when the compressor is running. If the fan isn’t working correctly, the refrigerator temperature can rise and overheat the compressor.

In most fridges, the condenser fan is located in the bottom cabinet. Only a few refrigerators will have condenser coils here instead of the fan.

For you to fix the problem, ensure the fan is spinning freely, and any objects are not obstructing it. If there are blocking materials, you have to replace the condenser fan motor. All you need to do is to buy a new motor from your local store and install it.

If you have the skills, you can install it by yourself, but if you have never done it before, ask a professional to help you out.

Failure of the air dumper to open and close properly

When the air damper doesn’t open or close properly, it impacts the temperature of the refrigerator. When the damper doesn’t open, cold air doesn’t travel from the freezer to the fridge hence making it warmer.

To fix the problem, remove the old air damper and replace it with a new one. You can remove it by yourself or hire a refrigerator repair Northern VA professional to help you out.

Washer Repair: Tips On How To Properly Clean Your Washing Machine

It’s a fact that the washing machine saves you time and effort. For you to keep it functioning optimally for long you need to take good care of it. Washer repair experts recommend that you clean it regularly to not only leave it looking great, but also to keep off awful smell and bacteria. For you to properly clean the unit you need to:

Wash the washing machine filter

It’s in the filter where gunk is collected after every cycle. Small items such as coins and buttons end up in the filter. With time, if you don’t clean it, dirt might buildup worsening the performance of the machine.

To clean the filter you need to begin with locating it. For the front load washing machines, the filter is located at the bottom, usually in the right corner. Remove it taking care that you don’t break it.

After removing it, use a paper towel to remove any lint that might have built up. Remove as much lint as you can using a paper towel. If the paper towel isn’t doing a good job, scrub off what is remaining using a toothbrush or sponge.

Pay attention to the screen that gathers all the gunk. Remove it and soak it in hot water to get out any dirt that might have stuck to it.

Once the filter is clean, take a look inside the unit before you put it back. Using a paper towel, trace the sides of the opening. You can also use an old toothbrush to get rid of all the dirt that might be on the inside.

To have an easy time, clean the air filter once every 3-4 months.

Get rid of the smell from the washing machine

If you have had your washing machine for a long time you must have been in a situation where you open the washing machine door and a pungent smell hits your nose. You don’t need to throw away your washing when it’s making the awful smells.

The first place you should look is the drawer. Take out the drawer then scrub it properly. You can use your hand or sponge. Once you are done with the cleaning, let it dry and put it back. For you to kill all the mold, use a mixture of baking soda and water.

You can also use a mixture of soda and vinegar. The mixture causes a reaction that eats away the mold or lint. Once the cleaning cycle has ended, you are left with a clean and fresh smelling machine. If you run a cycle with the mixture and still the machine doesn’t have a fresh smell, repeat the cycle.

It’s common for dirt and grime to hide in the crevasses of the seal. Mould also tends to grow there as the area holds moisture for a long time. To clean the seal, use a damp piece of cloth then run your fingers along the rubber to clean it. If you can remove the seal, do so and wash it under the water.

Pay attention to the outside of the washing machine

Cleaning the insides of the machine isn’t enough—you also need to clean the outside. It’s common for the washing machine to get dusty and start looking old and yellowish. To maintain the shine, use a dry clean cloth or rug.

Go over the entire exterior rubbing all the necessary areas. Get rid of the fingerprints and dried up marks that might be there.

Once you are done with the exterior, pay close attention to the windows. Start with going over the window with a dry rack to get rid of the excessive dust. You should then use your favorite mirror or glass detergent and spray it onto the glass. Once you are done, wipe the surface with a dry piece of cloth or paper towel. For ideal results, wipe in circular motions.

Cleaning products matter

For your washing machine to continue functioning optimally you need to keep it clean. Appliance repair Springfield professionals report that you should be cautious of the cleaning products you use. For ideal results, use high-quality detergents. If possible, go for eco-friendly detergents. While they will be a little bit expensive, they will give you perfect results.