Tag Archives: clean dishwasher

Dishwasher Repair: How Do I Get My Dishwasher To Clean Better?

dishwasher repair

A dishwasher is like an extra set of hands that makes your work easier, and your day a whole lot better.

If you have had your appliance for a long time, you must have noticed its efficiency dwindling, and you must be asking, how do I get my dishwasher to clean better?

Well, you are on the lucky side as dishwasher repair professionals report there are plenty of ways you can do it. Here are some of these ways:

Scrape off the leftovers

As much as you don’t want to touch the dishes when they get dirty, you should note that the efficiency of the appliance is significantly compromised when you deposit too much food residues into the system.

For your appliance to clean the dishes better, scrape off all the extra food from the plates before you put them in the dishwasher.

Some people go to the extent of pre-rinsing the dishes, but you shouldn’t. When you pre-rinse the dishes you not only give yourself extra work, you also reduce the efficiency of the appliance as the detergents don’t have enough space to adhere to in order to clean the dishes effectively.

Use hot water

Just like when cleaning the dishes by hand, hot water cleans the best, so ensure the water getting into the dishwasher is hot enough. Before you start running the appliance, check the temperature of the water at the kitchen faucet using a meat or candy thermometer.

For effective cleaning, the temperature should be 120 degrees. Adjust the setting accordingly.

Keep the dishwasher clean.

You should keep the dishwasher clean all the time. Regular cleaning eliminates stuck-on-food particles, mineral buildup, and residual detergents. To clean the dishwasher, run it on a normal cycle using two cups of white vinegar.

You should then wipe down the interior wall and racks with a solution of baking soda and vinegar. Once you are done, rinse thoroughly.

Soften the water

Do you live in areas with hard water? You should note that hard water tends to leave ugly residues on the glasses and plates. No amount of cleaning will leave the dishes sparkling unless you soften the water.

To soften the water, buy and install a water softener, and you will prevent stains and minerals from building up.

Load the dishes appropriately.

Sometimes the dishes will fail to clean properly if they aren’t correctly loaded in the dishwasher. For optimum results, follow the manufacturer recommendations for loading the appliance. As a rule of thumb, never overload the appliance as you will block the spray arm and prevent the water from reaching all the surfaces.

Use the right amount of soap.

Soap is necessary for clean dishes, but when you use too much of it, you end up with dirty dishes. For the cleanest clean, always pour the detergent into the built-in measuring cup inside the dishwasher. This way, you ensure that you are always using the appropriate amount.

Always ensure that you use the right soap for the work. As a rule of thumb never use dish soap designed for hand washing in the dishwasher.

Use the right cycle

Dishwashers come with different cycles aimed at different dishes. The regular cycle is for normal cleaning, the heavy-duty cycle for deep cleaning, and the light cycle for fragile items.

For effective cleaning, be aware of the items you are cleaning and ensure you are using the right cycle.

Inspect the dishwasher for clogs

It’s normal for clogs to develop in the spray arm and the drain, and as you might have guessed, they prevent the dishwasher from functioning optimally. Now and again, check the holes in the spray arm and ensure they aren’t clogged with food residues or hard water minerals.

To dislodge the particles, use a toothpick or needle. While you are at it, check the trap and drain to ensure that food scraps or other objects aren’t blocking the area.

You can do the work if you have the skills but for ideal results, let an appliance repair Northern VA handle it for you. When hiring the contractor, ensure they are experienced and certified to work in your local area. In addition to unclogging the appliance, they also should inspect other areas and fix them if problematic.

Dishwasher Repair: 5 Tricks To Get Cleaner Dishes From Your Dishwasher

The reason you invested in a dishwasher is that you want to have an easy time cleaning your dishes. There is nothing more aggravating than opening the dishwasher door after a cleaning cycle and find the dishes still dirty. This happens when you improperly clean the dishes. Do you want to have cleaner dishes after every cycle? Here are tips to follow as given by dishwasher repair experts:

Keep the dishwasher clean

There is no way you are going to have clean dishes if the dishwasher is dirty. At least once a week, inspect the dishwasher for dirt and clean it if dirty. Start with examining the drain filters as the dirt and grime from the dishes goes here.

When you go for a long time without cleaning the filters, they can clog up, preventing the dishwasher from cleaning as well as it should.

You also should pay attention to the spray arms. Use a cable, steel wire, or wire hanger to poke the arms and remove any gunk that might be there.

Over time, it’s common for gunk to build up around the interior of the doors. Clean the door seals by wiping them down with a damp piece of cloth or paper towel.

Run the right cycle

Dishwashers come with a variety of cycles that allow you to adjust the washing levels depending on what you are washing and the amount of washing you need:

  • Rinse cycle: Appropriate for light cleaning
  • Quick cycle: The cleaning ranges vary from half an hour to an hour. They are made to tackle light cleaning jobs.
  • Normal cycles: These are the most ideal for day-to-day cleaning of the dishes.
  • Pots and pans cycle: Ideal for large and more heavily soiled cookware.

Some dishwasher models have more specialized cycles, such as anti-bacterial and semi-rinse. For you to choose the right cycle, use the care manual as the guide. If you have lightly soiled dishes, a normal or quick wash will be perfect for you. On the other hand, if you have stuff that has baked or dried on the plates after a normal meal, go for the auto cycle.

Do you have baked-on stuff or cookware? Go for the pots and pans cycle. Choosing the right cleaning cycle is vital as a failure to do it will lead to dirty dishes at the end of the cycle.

Use the right temperature

For the best dishwashing results, the temperature of the water should be 120 degrees Fahrenheit. Water that is hot enough easily dissolves and activates the dishwashing detergents. It also dissolves grease leaving the dishes spot-free.

If the temperature is too low, the dishwasher doesn’t clean the dishes thoroughly. On the other hand, if the water is too hot, the ingredients in the detergent don’t function properly. Some of the soils might also fail to get adequately removed.

To check the temperature of the dishwasher, turn on the faucet nearest to the dishwasher. Place a thermometer in a cup under the faucet and let the water run into the cup. If the temperature isn’t around 120 degrees Fahrenheit,  adjust the water heater.

Load the dishwasher properly

How you load the dishwasher not only determines how efficiently the dishwasher functions, it also determines how clean the dishes get. Before loading the machine, scrape off as many excess foods from the dishes as much as you can.

Some homeowners go to the extent of rinsing the dishes, but you don’t have to. If there are bits of food that have crusted over and stuck on the dishes, don’t worry about them as the dishwasher will get rid of them when you run the appropriate cycle.

When arranging the dishes, do it by how dirty they are. Group the ones that need a heavy wash together and those that require light or standard cleaning by themselves. Doing this prevents you from having some of the dishes cleaner than others. It also prevents you from running two heavy cycles.

Keep the dishwasher in top shape

Cleaning the dishwasher isn’t enough. You also need to repair it regularly to keep it in top shape. When you notice a problem with the unit, ask an appliance repair Springfield professional to give it a look and fix the problem.