Tag Archives: washer care

Parts that Commonly Break in Different Appliances

Are you wondering which are the common parts that break down in your appliance? Here they are as given by appliance repair professionals:

Refrigerator

The ice maker draws water into uniform ice molds. Once the cubes have formed, the molds are heated or twisted to release the ice, and a sweep arm ejects them into a container to be distributed as needed.

In the refrigerator, this is the most common part that breaks down. 

Problems with the water supply are the most common reasons ice makers stop working. Ice makers require a constant supply of water to function effectively. 

The ice maker may stop working if there is a problem with the water supply, such as a plugged or frozen water line. Examine the water line to ensure it is correctly connected and not kinked or blocked.

The water inlet valve controls the water flow into the ice maker. Water may not reach the ice maker if the valve is faulty or obstructed. This can result in no or insufficient ice production.

Ice can collect and jam the ice maker mechanism over time, preventing it from working correctly. This can happen in the ice mold, the ice chute, or the water line, causing the ice-making process to slow.

Regardless of why your ice maker isn’t working, you should try out troubleshooting methods specific to your model, listed in the user handbook.

If the problem persists, it is recommended that you contact a professional technician or the manufacturer’s customer care for assistance.

Dishwashers

In most cases, you won’t notice most dishwasher problems immediately. Your dishwasher will gradually stop washing well until you’re fed up and wondering what’s happening.

The most common problem with dishwashers are clogged filters and spray arms. Over time, dishwasher filters and spray arms get clogged with food particles, debris, or hard water deposits. 

When these components get clogged, water flow is impeded, resulting in poor cleaning performance or a dishwasher that won’t finish a cycle.

In other cases, the problem is brought about by overloading the unit. Overloading or poorly loading the dishwasher can obstruct the spray arms, prevent adequate water circulation, or interfere with the operation of other components.

To avoid damaging your dishwasher, follow the manufacturer’s instructions when loading your dishwasher.

In rare cases, your impeller will break. The impeller is the pump that creates the water pressure required to spin the spray arms. 

If a seed, pit, or piece of glass gets inside the pump, it might cause harm. You should address this problem as soon as possible.

This can cause water to flow into the motor and onto your floor. How will you know if your impeller needs to be replaced? There will be a loud rumbling noise.

As mentioned, you should move with haste and fix it before things turn for the worse.

Washers

The most common parts that break in a washing machine are: 

The door or lid switch: Prevents the drum from spinning until the door or lid is shut.

The drain pump: It is responsible for removing water from the drum.

Tub bearings Keep the tub in place and allow it to spin smoothly.

When your washing machine has problems, it will make squealing and knocking sounds. 

A worn or loose belt often causes a squealing noise. The belt that drives the drum might have become worn or slack over time, causing it to slip or squeak. This problem means it’s time to get a replacement for the belt.

You will hear the sound if the motor is malfunctioning. You should contact a professional technician to inspect and repair the motor in such instances.

Knocking sounds often come about due to loose or damaged parts. Check for any things that might have fallen into the drum or trapped between the drum and the tub, such as buttons or coins. 

Unsecured drum paddles or tub mounts might cause knocking sounds during the wash cycle. Find out where the noises are coming from.

Dryer

The common parts that break in the dryer are: 

Thermal fuse: Prevents overheating of the appliance.

A wire coil in an electric dryer or a burner in a gas dryer serves as the heating element.

A continuous piece of felt wrapped around the rim of the drum allows it to spin while controlling airflow.

The beauty of most dryers is that they are often well made, and as a result, there are relatively few dryer problems that cannot be fixed—it is uncommon to have to replace the entire unit due to this problem.

How to ensure your appliances last for a long time

You must do several things to prevent your appliances from breaking down often and ensure they last for a long time. These things include: 

Ensure that your appliance is properly installed. This calls for you to follow the manufacturer’s installation instructions. Remember that improper installation can cause problems with performance or even damage the unit. After buying the unit, take time to find an experienced professional to help with the installation. Don’t hire just anyone. 

Because appliances are susceptible to power fluctuations, it is critical to ensure that you have a stable power source. Use surge protectors or voltage stabilizers to safeguard your appliances from voltage spikes and electrical surges.

Keep your outside and inside appliances clean by regularly wiping off surfaces and following the cleaning recommendations. Remove any accumulated dust, grime, or debris to ensure proper functioning.

It’s wise to have a maintenance routine for each of your appliances. Regularly inspect and clean filters, vents, coils, and other components during maintenance, as directed in the user handbook.

Also, arrange for professional servicing or tune-ups to keep the appliances in good working order.

As a rule of thumb, ensure that the servicing is done by an expert commercial appliance repair Springfield who knows what they are doing. 

Regardless of how versatile an appliance can be, use every appliance for its intended purpose and only utilize it for tasks it was not built for. For example, don’t use a dryer as a heater.

Why Does My Washing Machine Smell Like Rotten Eggs?

Have you noticed a rotten egg smell coming out of your washing machine, and you are wondering why this is the case? The smell is brought about by several factors that include:

Dirty washing machine

When was the last time you cleaned your washing machine? If it has been long, the smell might result from a dirty appliance. According to appliance repair professionals, the best way to get rid of this smell is to simply clean the appliance and, in the process, get rid of mold, mildew, and grime that might have built up there.

To clean the washing machine, begin with opening the machine door and then set the unit to the hottest and largest load capacity.

Once the water begins to fill up, add one quart of bleach (about 4 cups) to the water inside the washing machine.

When the water fills up the washer, close the lid and turn it on to a long spin cycle. When the cycle ends, leave the machine for about one hour before turning it back on, and then put it on a standard wash cycle.

When the wash cycle ends, turn it to the hottest setting and largest capacity again, and then add 3 cups of white vinegar and a ½-cup of baking soda.

Once the washer is full, close the lid and turn it on to a long spin cycle again. Open the lid and wipe the washing machine out with a clean cloth when the cycle ends.

Finally, leave the washing machine lid open and let it dry out for a few hours before using it again.

Something is stuck in the door seal.

Washing machines have a large rubber door seal that goes around the door to stop water from getting out of the washing machine during a cycle.

Sometimes a piece of clothing such as a sock gets stuck inside the gasket, and it’s covered in mildew.

If you leave the piece of clothing here for a long time, it can start smelling like rotten eggs.

To get rid of the smell, you need to find out if there is anything stuck there and remove it.

Pull the door seal back and look inside for any loose clothing items. If you find any, remove them.

You should then thoroughly clean the door gasket with clean, hot soapy water, then leave the door open to let it dry and air out.

Clogged drain pump or plug

Most washing machine models will have a drain plug at the bottom that can clog up, leading to unpleasant odors.

To check the drain plug and filter, locate the drain plug, then turn the cap off. Have a towel in place as some water might leak out of it when doing it.

After removing the plug, reach into the hole and remove the drain filter. Thoroughly clean the drain filter and plug it in hot soapy water.

To remove any grime in the hose, pour a glass of hot water mixed with vinegar into the washing machine drum.

After cleaning all the parts, put them back into the washing machine. If you can still smell the rotten egg smell, you may need to run your washing machine on a cleaning cycle and check the sewer.

The sewer is clogged.

If you have tried all the above and nothing seems to work, the rotten smell might be due to a clogged sewer. Due to the clog, the smell can go through the drain hose and into the washing machine.

To solve this problem, locate where your drain hose is connected and remove the hose from the standpipe. If the pipe is smelly, give the entire area a thorough cleaning with hot, soapy water.

If the smell is due to the P-trap being faulty and allowing sewer gas to come up through the drain hose and into the washing machine, washer repair Springfield professionals recommend you pour a bucket of hot soapy water down the standpipe.

If the smell goes away, this is a sign that the problem was due to the P-trap.

If you do this and the smell doesn’t disappear, get in touch with a plumber to replace the p-trap.