Tag Archives: refrigerator contractor

Commercial Refrigerators Services: Refrigerator Problems You Can Fix By Yourself

com0005

It’s imperative to keep your refrigerator in perfect working condition to keep food and other un-edible items fresh. Although, it’s recommended that you hire a commercial refrigerator professional to fix the appliance when it breaks down, you don’t have to hire the professional every time. Here are simple refrigerator problems that you can fix without the help of a contractor:

Always running refrigerator

A refrigerator that is always running not only makes a lot of noise, it also consumes a lot of power thus you end up paying hefty power bills. The most common cause for this problem is deposition of dust and debris around the condenser.

According to refrigerator contractors, this problem is common when you place the refrigerator in dusty areas.

The problem is also common when you set the refrigerator temperature too low. This causes the appliance to work overtime. The appliance can also freeze food and in severe cases spoil food.

To fix the problem you should get rid of dirt and debris in the condenser coils. In most refrigerators, condenser coils are located at the bottom of the appliance. You should use a vacuum cleaner to remove the buildup.

You may also be required to set the temperature to prevent your refrigerator from working overtime. You set the temperature to between 37 and 40 degrees Fahrenheit.

Water leakage

Water leakage is a common problem that you can easily fix. According to commercial refrigerator technicians, the problem results from a blocked defrost drain. This happens when food particles or other debris clog up the drain hose resulting to breaking up of ice and water leakage from the freezer and refrigerator.

The problem can also come about due to frozen or clogged water supply lines. This affects ice production from the ice maker and water flow tends to stop.

To fix the problem, you should locate the rubber check valve located on the defrost drain hose. You should remove the valve and then clean it with hot water and soap.

If this doesn’t fix the problem, you should locate the shut-off valve located under the sink behind the refrigerator. You should carefully go through it and ensure that it’s fully closed.

Conclusion

These are two of the most common refrigerator problems that you can fix without the need of hiring a refrigerator repair contractor Fairfax. Although, you don’t have to hire a contractor, it’s wise that you hire him/her if you have tried fixing the problem and it doesn’t go away.

Should I Turn Off Refrigerator When Not In Use?

appliance repiar

If you are going on vacation for a month or more, you can’t keep your electric appliances running. One of the questions you must be asking is, should I turn off the refrigerator when not in use?

The answer to this question is a definitive yes. Appliance repair professionals recommend you turn off the fridge and unplug it at the wall.

The obvious reason you should shut the fridge is to save power. You don’t want to keep receiving high energy bills you aren’t consuming, are you?

The other reason you should shut the appliance is because you don’t want to keep worrying about what is going on at home.

Although, they are good servants, most appliances are ticking time bombs especially when they run unsupervised. They can fall, catch on fire, among many other things.

When you shut your appliance, you have peace of mind that none of your units can start a fire in your absence.

Besides shutting and disconnecting the fridge, there are several other things you should do when you will be gone for extended periods. Some of these things include:

Defrost and clean the appliance

If you don’t properly clean the fridge before storage, you will create a lot of mess that the fridge will be unusable by the time you are retrieving it from storage.

One major concern is mold that often starts from the food debris and spreads to the other parts of the fridge. There is also the pests concern. Ants and rodents can be attracted to even the smallest food pieces so when you don’t properly clean the fridge, these pests can get into your appliance and cause damage to the electrical components.

To defrost the fridge, remove all the food items and unplug the fridge. This will trigger the defrosting process and you should keep the refrigerator doors open so that moisture can escape from the fridge.

To avoid flooding your floor, strategically place a towel to catch the dripping water.

For peace of mind that the fridge is completely dry, defrost it at least a week before you leave for your vacation.

As the fridge is defrosting, you should clean both the insides and back of it.

Take out the drawers, shelves, and other removable parts of the appliance. Clean and soak these parts with mildly soapy water. For best results, ensure the water is warm. Avoid scalding hot water as it can damage the cold plastic or glass.

Using a mixture of baking soda and water, scrub away any materials that might have built up inside the fridge and freezer compartments.

As much as you want the fridge to be spotless, don’t use chlorine bleach, ammonia, or any other abrasive cleaning solutions as they can crack or even discolor the plastic and stainless steel.

Once the insides of the fridge are clean, turn your attention to the outside. Dust the coils using a brush attachment or run a vacuum cleaner. You can also use a dry cloth.

Store the fridge in an upright position

If you will be moving the fridge from its usual place, use a dolly or hand truck to move it. As a rule of thumb don’t move the fridge while laying on its side.

When you store it, ensure that it’s not in a slanting position—it should always be in a straight position.

The reason for this is to ensure that you come home to a properly functioning compressor.

Keep the fridge dry

The last thing you want is to reverse all the hard work you have put into cleaning and defrosting your appliance.

To ensure that your fridge remains dry and no moisture gets inside, remove the doors on both the fridge and freezer compartments.

According to refrigerator repair Springfield professionals, when you do this, you ensure no seal forms so your appliance is free from molds.

If you don’t want to go through the trouble of removing the doors, wedge an object between the door and the compartment frame so that the door remains open.

When choosing the wedging object, ensure that the object is tough and won’t bend or get indented over time hence close the door and cause the damaging seal to form.