Just like any other appliances in your place of work, glass washers also develop problems. Here are some of the common problems as observed by glass washer repair professionals.

Plenty of water on the glasses

This happens when you don’t load the glasses properly. When you put glasses in the glass washer, the unit should not only clean the glasses, it should also rinse them. For water to be fully rinsed off you have to position the glasses in a way that you allow the water to run off. If you are properly placing the glasses but they are still not getting rinsed, chances are that you have a faulty heating element. You should hire a kitchen appliance technician to inspect the unit and fix it.

Poor glass cleaning

If you notice that the glasses are not getting clean as they should, the problem could be with the dishwashing liquid that you are using. The liquid could be weak. The solution to this problem is using a strong dishwashing liquid.

Food around the filter

A dirty filter results to dirty glasses. To keep your glasses clean, commercial kitchen appliance service providers recommend that you clean the filters regularly. To prevent food from being added to the filter you should scrape as much food particles from the glasses as you can.  Kitchen appliance professionals also report that how you clean the glass washers has a great impact on the condition of the filters. To be on the safe side only use normal and auto wash cycles when cleaning. To keep the filter clean, use a dishwasher cleaner when cleaning your unit.

Cloudy Glassware

There are many factors that will give your glasses a cloudy look. Two of the most common factors are limestone deposits and corrosion of the glasses. If there are limestone deposits you should add limestone remover in the water.  To tell whether your glasses are corroding, you should undertake the vinegar test. If you do the test and the glass is still cloudy, then the glasses are suffering from surface corrosion. If the glass is not cloudy after the test, the problem is due to hard water. You should check the water hardness and adjust the rinse aid setting in your unit.

Conclusion

You can fix some of the dishwasher problems on your own but if the problems are complex you should hire commercial appliance services Vienna to help you with the work.