It’s frustrating when the washer isn’t working properly. When many people identify problems with their washing machines, they rush to call washer repair professionals. You don’t need to do this as you can diagnose the problems and fix them by yourself. Here are some of the most common washer problems and how to fix them:

Failure of the washer to run

You switch on the unit and it doesn’t start. It’s frustrating, isn’t it? When this happens the first thing you should do is to check whether the unit is plugged in. It’s common for the plugs to get loose after being bumped by animals. Objects can also fall on the plugs. If the unit isn’t properly plugged in, do so.

If properly plugged in but it still isn’t working, you should check the breaker box. Has it tripped? Raise it.  Still not working? Check the home electrical box and see whether the fuse has blown or the circuit breaker has tripped. If the problem is with the fuses, you don’t have to worry as you can easily replace them.

If everything is fine and still the unit won’t work, check the lead switch. These switches tend to break. The good thing is that they are easy to replace. In some cases, they can gunk up with lint and detergent residues. All you need to do is to clean the contact lenses using a swab and rubbing alcohol.

Still not working after doing all this? it’s time to call a professional to inspect the unit and fix it.

Failure of water to get into the washer

You need water to do laundry; therefore, when there is no water getting into your unit, you can’t do anything. When there isn’t any water getting into the machine you should check the valves and ensure they are open. Some of the washers won’t work unless both of the valves are open; therefore, open them.

Are the valves open but still the water isn’t getting in? You must be having a clog in the filter screen. For you to fix this problem you need to uplug the machine, unscrew the hoses, and check whether there is a clog in the filter. If this is the problem, a simple cleaning is enough to restore the machine to its previous working condition.

The washer making loud noises

The washer is supposed to make some mild noise, but when its making a lot of noise, you have a reason to worry. The washing machine will make a lot of noise when its loaded improperly or the laundry has shifted during the cleaning cycle.

To get rid of the noise you need to stop the machine and load it properly. If you have a standard top load washer, load the clothing on both sides of the central agitator.

Are there humming, gurgling, or clicking noises coming from the machine? There might be objects caught in the internal mechanisms of the machine. The machine might also be having clogged drains. For to get rid of the noise you need to stop the machine and check the source of the noise. In most cases you will find a button, coin, or tiny toy in the machine.

Is the machine making screeching or squealing noises? This might be a sign of an internal mechanical problem. You need to contact a washing machine expert to help you with the repair.

Leaking of the washer

There should be no water on the floor when you are using a properly functioning washer. When you notice water puddles on the floor, the first thing you should check are the hoses connecting the hot and cold water valves.

Are the hoses loose? Tighten them. If the hose has small splits, replace it immediately. This is to prevent the hose from bursting creating a lot of mess in the room.

Clothes still too wet after final spin cycle

By the time the clothes are going through the final spin cycle, they should be almost dry. If they are still quite wet, check the condition of the drain hose. Is it kinked or crushed? Fix it. Appliance repair Alexandria professionals also recommend that you check whether the water pump is clogged with lint or any other small objects. If this is the case, clean it.