Just like any other appliance, the washer also develops problems. When the problems come about, you can fix them by yourself if you have the skills or hire a washer repair professional to help you out. The most common washer problems are:
Failure of the machine to turn on
This can throw you into panic mode especially if it’s the first time it’s happening. Before you do anything, check the unit and ensure that its plugged in and the circuit breakers haven’t tripped. Sometimes the unit will fail to turn on if the clothes aren’t evenly distributed.
If this is the case with yours, redistribute the clothes within the drum, ensuring an even load. You should then close the lid tightly. Does the machine now turn on? If it doesn’t, you must be having problems with the timer circuitry. The problem might also be in the lid switch or electrical outlet. These areas require the expertise of a professional; therefore, don’t try fixing them by yourself.
Failure of the machine to drain
A properly functioning washer should drain water from the drum before the spin cycle begins. If you open the lid and after washing them you find the clothes still swimming in water, the drain hose must be clogged. If it seems clear, you must be having issues with the water pump or drive belt. This requires that you hire a washer expert to repair it. If it’s too damaged, replace it.
Jumping and weird noises coming from the washing machine
You will experience this problem when you have improperly loaded your washing machine. Fixing the problem is easy as all you need to do is to stop it and redistribute the wet clothes. Does it still make the noises? It might be off-balance. Check the level and ensure that the feet are positioned on a flat surface. Also, consider placing it on a rug or mat that will absorb some of the force.
Failure of the washer to spin
If the washer fills normally and doesn’t agitate or spin, check the door and ensure that it’s latched properly. Also, check the belts for wear and tightness. Is the problem fixed? If it hasn’t, the unit might be having issues with the drive motor coupling or clutch assembly. This problem is usually complex and requires that you hire an appliance repair technician to help you with the diagnosis and repair.
Bad smell coming from the machine
If your washer has a musty or mildew smell it means, there is mold or bacteria growing in your unit. You need to get rid of the bacteria for you to get rid of the smell. For you to prevent the problem from coming about you should always use the right amount of detergent. Also, make a habit of leaving the washer door and detergent dispensers open when you aren’t using the machine.
Washing machine experts also recommend that you regularly run a washing cycle while the machine is empty.
Washing machine leaking water
A properly functioning washing machine won’t leak any water. If water is leaking from your unit, check the hoses by running a dry cloth or paper towel along the length. If the hoses are the problem, replace them as soon as possible.
In some cases, the leakage is due to an old appliance. In such a case, you have no way out other than to replace the old machine with a new one.
The washer fills and drains simultaneously
Have you come across a problem where the washing machine fills during the drain cycle and sticks in this phase for a long time? You will have this problem when the machine has a defective water inlet valve. Washing machine professionals also observe that you will have the issue if the water level switch, electrical circuit, or air dome hose is working ineffectively.
If you don’t have the necessary skills, this problem is complex and you should let it be handled by an expert.
Failure of the machine to fill
Have you tried filling the unit with water, but it doesn’t? The hoses could be kinked or disconnected. The faucets may also be shut off, the filters might be clogged, you might be having a delayed cycle selection, or any other problem. You need to hire an appliance repair Springfield professional to help you in diagnosing the problem and fixing it.