Tag Archives: appliance repair services

Common Appliance Problems and How to Deal with Them

Appliances break down every time, and the problems range from minor issues to complex ones. There are different ways of dealing with these problems. Some of the problems are minor, and you can have them fixed with the help of an appliance repair professional, while others require you to replace the entire unit.

To help you out, here are some of the common appliance problems and how to deal with them:

The freezer not maintaining the correct temperature

This could indicate a problem with the door seal. Check for tears, warping in the corners, and even areas where the seal has hardened. You can replace it yourself.

Sometimes it’s as simple as removing the old one, but you may need to unscrew several screws that hold it in place. New seals are available online at a small cost.

The problem could also be with your refrigerator’s thermostat, which is located behind the temperature dial. You can replace this with a few home DIY tools.

If your fridge-freezer has front-mounted digital controls, this is a significantly more complicated problem to repair and should be done by a professional.

Your freezer drawers might also break. Thankfully, you can buy new drawers and replace the unit. It is simply a matter of purchasing the appropriate part for the model you have.

When doing it, be aware that manufacturers sometimes charge a high price for them, so look around to see if you can obtain the one you want for less elsewhere.

Water leaking from the bottom of the fridge.

This could be caused by a clogged drain hole. Water condenses at the rear of the fridge, where it is colder, and runs down into the drain hole.

Dust, grime, and food waste frequently become stuck within, but you can quickly clean it using a small straw, a piece of wire, or a cotton bud.

If this does not work, consider purchasing a special drain hole cleaning tool. A skilled repairer may also use a steam cleaner to go further into the pipe.

If the defect causes your fridge to be written off, you have no other way out other than to get a new unit.

Faulty battery in your vacuum cleaner

All lithium-ion batteries lose capacity with time, although you can easily replace them. A cordless vacuum can only be considered a good buy if its battery is changeable. The bad news is that they can be pricey.

If the battery is not changeable, you don’t have another way out other than to replace the entire vacuum cleaner.

If the battery is replaceable, go ahead and install a new one. You should charge your battery only with the official charger and keep it away from heat to extend its life. Try not to drain the battery entirely. Frequent short charges are preferable for keeping it healthy.

To avoid being left holding a unit that will be cumbersome to own, take your time when making the purchase. As a rule of thumb, only buy a vacuum cleaner with a replaceable battery.

The dishwasher failing to drain as well as it should

The most common culprit is a blocked filter or pump, which you should be able to fix on your own. The pump is found under the filter.

You will need to remove the top and wash the inside. If this does not solve the problem, examine the drain tube at the back of the machine for blockages.

Besides your unit failing to drain as well as it should, it also might have a faulty seal. If your dishwasher leaks slightly, you have a broken door seal. Thankfully, a replacement seal comes cheap.

Another common problem with dishwashers is a faulty electrical system. Professional repairs for electrical issues don’t come cheap, therefore, it may not be worthwhile to fix older or less expensive models. Request a quote from an engineer before deciding on whether to fix your unit or not.

Burners not working in the hob.

If your gas burner does not ignite, it is likely that the spark is not working correctly. If it doesn’t stay lit, it’s because of the thermocouple. Replacing this is a job best left to professionals.

Faults on electric hobs, whether ceramic or induction, are far more difficult to diagnose. Your best bet is to contact an expert or get a replacement.

The touch controls might also fail to work. Problems with the controls will most likely be attributed to the circuit board (PCB), which is hidden beneath the glass surface.

You will need to get a professional quote to replace this. It’s complicated and expensive, so you might be better off replacing the entire unit.

The dishwasher is wobbly and noisy.

Almost all current washing machine drums are sealed shut, so you can’t disassemble them to replace the bearings (the most common source of issues).

This implies you’ll need to replace the entire drum, which is a costly and demanding repair best left to professionals.

You may be better off purchasing a new model because of the high cost. Obviously, you should request a quote before making a selection.

Your dishwasher might also fail to empty the water as well as it should. If your washing machine isn’t draining water properly, take a look at the filter behind the door lock.

Try to clear it out. If that doesn’t work, simply replace it. If it does not solve the problem, the drain pump is most likely the culprit. It is difficult to replace yourself and is not for the faint of heart, so you should hire an expert to help you out.

Parting shot

These are some of the common issues you can have with your appliances. You can fix the unit by yourself, but if the problems are too complex, let an experienced commercial appliance repair Northern VA professional help you out.

As mentioned, always weigh your options and find out whether fixing the problem is worth the cost or if you should simply get a new unit.

Tricks to A Perfectly Functioning Dishwasher

A dishwasher isn’t a necessity, but it really comes in handy. After all, who wants to deal with a massive mound of dishes after preparing and eating a meal? Unfortunately, you can’t enjoy your unit if it functions incorrectly.

Thankfully, you can do several things to ensure that the unit is always in top working condition. These things include:

Keep the filters clean at all times.

You should clean your dishwasher’s filter after each usage. That may seem like a lot of labor, but it’s worth it.

After removing the filter from the machine, just rinse it under running water to loosen any trapped particles, allow it to dry, and then replace it. If you can’t remember to do it after each usage, try once a week.

The beauty of cleaning the filters is that you don’t need to hire a dishwasher repair professional to help you. You can easily do it by yourself.

Always scrape food from the dishes.

To avoid clogging the filter, scrape your plates and remove as much food residue from pans and dishes as possible before adding them to the washing machine. Foods like Weetabix and porridge adhere to dishes if they sit in the dishwasher for an extended period before being run.

Put these plates in the sink to catch the water when you run the faucet. This will assist in soaking up the worst of the breakfast leftovers. Then, just before the cycle begins, place them in the dishwasher.

Some people have the notion that they should pre-wash the dishes before placing them in the dishwasher, but you don’t have to. In fact, you usually end up causing more havoc when you pre-wash the dishes.

This is because when you pre-wash the dishes, you remove the adhering surfaces for the soap. As a result, the soap doesn’t clean the dishes as well as it should. The consequence is leaving you with dirty dishes even after running them in the dishwasher.

The right way to do it is to scrape the food from the dishes, and you are good to go. This will remove the food particles that can clog the unit and, at the same time, leave binding spaces for the soap so that it effectively cleans the dishes.

Keep the dishwasher salt topped up at all times.

Experts report that using salt is the key to a long-lasting dishwasher. Salt serves two functions in your machine: first, it softens the water and prevents the buildup of hard water deposits, and second, it helps keep the dishwasher clean by preventing bacteria buildup.

Some dishwashers allow you to tell how hard the water is where you live, but if yours doesn’t, you can find out the exact level by calling your local water board.

If your dishwasher has this feature, it will use the least amount of salt necessary to keep hard water deposits at bay.

A common misconception is that you don’t need to add salt if you live in a soft water area or have a water softener. This is not the case.

You must always add salt to the machine to keep it bacteria-free. If germs are allowed to multiply, your dishwasher’s water flow and wash performance will suffer.

Inhibiting the water flow over time may dramatically diminish the life of your dishwasher. And you don’t want this, do you?

Regularly check spray arms for blockages.

You should also clean the spray arms regularly with a mix of washing up liquid and water (how often depends on how frequently you use your dishwasher).

While you’re at it, look for debris in the jets, such as fruit pips and small food particles. A clever approach is to send water into the intake of each arm – if it flows freely, it is not clogged. If it is, clear it with a toothpick or something similar.

Besides unclogging the spray arms, check them to confirm they aren’t bent. If they are, straighten them. In some cases, you might find them too bent or damaged. In such a case, simply straighten them.

Deep clean the dishwasher

Dishwashers are one of the appliances that many people clean the least. This is because many people have the impression that they are always clean, but this isn’t the case.

According to survey, consumers clean their dishwashers three times per year on average. This is not enough. The best way out is to thoroughly clean your dishwasher every two months by running it empty on the hottest setting.

You should soak a cleaning cloth in hot, soapy water and wipe off the surface of dishwashers with plastic exteriors. Wipe it dry with a clean, dry cloth or a paper towel.

After this, fill a spray bottle with a homemade solution of one part vinegar to three parts water if your dishwasher is stainless steel. Spray it on the exterior of the dishwasher and wipe it clean with a cleaning cloth.

A screen in your dishwasher collects food and other particles. The screen becomes clogged with time, resulting in badly cleaned dishes and increased wear and tear on your dishwasher.

You should remove the filter from the bottom and spray it with hot water from the kitchen sink.

Soak the filter for 10 minutes in warm, soapy water before rinsing with hot water. Use a scrub brush to remove any leftover food particles or residue.

Rinse your filter, then before putting it back in the dishwasher, check the drain for buildup and clean it with a sponge.

Parting shot

These are some things you need to do to ensure that your dishwasher is always in top working condition. Besides these things, also use your dishwasher correctly. As a rule of thumb, never run it when it’s too full, as it will fail to function optimally and reduce lifespan.

For peace of mind that your unit is in good working shape, contact appliance repair Fairfax professionals at least once a year to look at it and fix any issues it might be having.

What Are The Three Most Important Rules When Using A Dishwasher?

You should follow plenty of rules to ensure that you properly clean your dishes using the dishwasher and keep the unit in top shape. While this is the case, you should follow a couple of more important rules.

If you are wondering which these rules are, here they are as given by appliance repair professionals:

Sort dishes properly

You need to sort the dishes properly to ensure that all of them are properly and there is enough room for the water to circulate.

If you are new to this, here is a guide you should follow:

Place large items on the bottom rack, such as pots, pans, and casserole dishes. When doing this, you allow the larger dishes to be closer to the water source and ensure that they get cleaned properly.

For medium-sized items, such as plates, bowls, and cups, place them on the middle rack. as you place them, take care not to stack them too closely together, as doing so will prevent the water from reaching all surfaces.

The small items, such as utensils, cutting boards, and small bowls, belong on the top rack. You can place these items in the utensil basket or on the top rack, depending on the size and shape of the dishwasher.

Avoid placing sharp or pointed items, such as knives, on the same rack as delicate items, such as wine glasses, as you will break them. The best way to do it is to place them separately to prevent damage.

Besides these tips, it’s also wise to consult the owner’s manual for specific instructions on loading your dishwasher. This is because some dishwashers have specific loading instructions or features that you should be aware of.

Don’t overcrowd the dishwasher.

Overcrowding the dishwasher prevents the dishes from getting clean and also damages the dishwasher itself. To be safe, leave enough space between the dishes to allow the water and detergent to reach all surfaces.

This calls for you to avoid stacking dishes too closely or placing them at odd angles.

You also should avoid filling the dishwasher to the point where it is overflowing or packed too tightly. This is because this can prevent the dishes from getting clean. It can also damage the dishwasher, and you are forced to repair it, which isn’t cheap.

As you arrange the dishes, always use the correct rack for each item: Be sure to place larger items on the bottom rack and smaller items on the top rack. The purpose of doing this is to ensure that all items are cleaned properly and that there is enough room for the water to circulate.

You also should be cautious of the detergent dispense and ensure you don’t block it. Leave the detergent dispenser clear to dispense the correct amount of detergent during the wash cycle.

Use the right detergent.

The detergent you use determines how well your dishes get and impacts the dishwasher’s durability. Of course, when you use the wrong detergent, you significantly increase the chances of damaging your unit.

To stay on the safe side, use a detergent specifically designed for use in your dishwasher.

You should avoid hand dishwashing detergents as they are not formulated for dishwashers and can create suds that can damage your appliance. Also, avoid detergents with bleach as the bleach can damage dishwasher parts and may be harmful to inhale.

Detergents with added enzymes are also a no go zone. While the enzymes can be effective at breaking down food particles, they can also be harsh on your dishwasher’s seals and gaskets, damaging the appliance.

While non-phosphate detergents are environmentally friendly, they may not be as effective at cleaning dishes as detergents that contain phosphate, so stay away from them.

As mentioned, find the detergents designed for your dishwasher and go for them. For a great experience, dishwasher repair Alexandria experts recommend using the correct amount of detergent as specified by the manufacturer.

How to Use a Dishwasher for the First Time

Have you just bought a dishwasher or moved to a house with a dishwasher and you have never used it before? Here is a guide given by dishwasher repair professionals on how to use a dishwasher for the first time:

Load the dishwasher

Everything begins here. After all, there is no way your dishes will get clean if you don’t load them, right?

To give your appliance an easy time, scrape any extra food from the plates before placing them in the dishwasher. Evenly space the dishes with the dirty side angled down towards the water jets, taking not to overlap the dishes, as doing so will prevent the water jets from reaching the insides for thorough cleaning.

Place the right items in the top and bottom racks for pristine cleaning.

For the top rack, load items such as cups, mugs, bowls, wine glasses, and even water bottles. Position the small bowls and plates between the tines and place the plastic container and lids on the top rack to avoid warping.

As you are placing the plastic containers, note that not all plastics are dishwasher safe, so check the bottom of your plastic ware to ensure that it’s safe.

When it comes to the bottom rack, place large kitchenware such as serving platters, dinner plates, stainless steel pots, dishwasher-safe baking dishes, and other heavily soiled dishes.

Position the pots and pans along the sides of the dishwasher or towards the back and add utensils to the dishwasher’s utensil basket. When placing the items in the basket, ensure that the sharp objects such as knives face downward, to avoid injury.

Before closing the dishwasher door, ensure that nothing is blocking the wash arms.

Load the dishwasher detergent

Once the dishes are in place and in their right racks, the next thing you should do is to load the dishwasher detergent.

While detergent dispensers vary depending on the model, you should follow the same procedure regardless of the nature and placement of the dispenser in your appliance.

Begin placing the detergent in the detergent dispenser, then add rinse aid to the rinse aid dispenser up to the point where it says full.

You should then close the lid and press firmly until it clicks shut.

You should note that the detergent you use on the dishwasher significantly impacts the results you achieve, so ensure that you use the correct one. As a rule of thumb, use detergents formulated explicitly for automatic dishwashers.

There are plenty of detergents you can use. From liquids, gels, tablets, packs to powders, you will be spoilt of choice. There is no right or wrong detergent to use—you only need to find the one that works the best for your appliance and use it.

Select a wash cycle

Now you have your dishes and detergent in place, the next task is to choose a wash cycle. Most dishwashers have at least three cycles: quick, normal, and heavy.

Quick: This cycle uses a lot of water, energy, and high temperatures, giving you fast results. Use this cycle when you have lightly soiled dishes and are in a hurry.

Normal: The normal cycle is the most commonly used, and it allows you to clean everyday messes without using extra water. Use this cycle on the day-to-day loads that aren’t heavily soiled.

Heavy duty: This cycle works best for loads that include pots, pans, and other heavily soiled items. As you might be guessing, this cycle will use a lot of water and higher temperatures.

The cycle you choose depends on the size of your load and how dirty your dishes are.

Setting a cycle is easy as all you need to do is use the buttons located on the top or front of the appliance.

Start the dishwasher

After setting up everything, the next thing you should do is to start the dishwasher. Before you fire it on, appliance repair Northern VA recommends you double-check and ensure there is nothing blocking the wash arms.

For your appliance to function optimally, ensure that the water temperature is 120ºF as it enters the dishwasher. Remember that if the water is too cold, it won’t clean the dishes as well as they should. At the same time, if the water is too hot, it might make the baked-in food harder to remove from the dishes and pots.