Commercial Appliances Repair : Putting A Lens On The Common Ice Maker Problems

By | October 30, 2023

appliance repiar

Just like any other appliance, the ice maker develops problems. For the unit to continue working you have to hire a commercial appliances repair professional to fix it. There are many problems that can face your ice maker. The most common ones are:

Failure of the ice machine to make ice

This is probably the most common problem with an ice maker. The problem comes about when the water’s route is blocked or the solenoid fails to work. There are a number of things that you can do to fix the problem. One of the things is checking water supply line. Check the water supply and ensure that it isn’t kinked behind or beneath the refrigerator.

You should also take a look at the tap valve. This is a little device that connects the water supply of the ice maker to the water pipe. If it’s faulty, ask a commercial ice maker repairs professional to replace it.

Another area that you should look at is the electrical connection. Check whether the motor is working.

Other areas that you should pay attention to are: Shutoff arm, supply valve, water inlet switch, thermostat, water inlet valve, holding switch, ice mold heater, freezer temperature and ejector.

Ice maker makes ice cubes that are too small or too large

The most common cause of this problem is the cube size control. All you need to do is adjust the control to your preferred settings. In addition to this you also need to check the supply valve, water supply line, water inlet valve, and water inlet switch and ensure that they are working perfectly.

Ice machine fails to eject ice

I’m sure you have come across this. The ice machine makes good ice, but fails ejecting it. How frustrating is that? The most common cause of this problem is the motor assembly. If you have the skills, you should dismantle the motor and fix the problem. If that doesn’t fix the problem take a look at other areas of the ice maker. They include: holding switch, thermostat, ice mold heater and ejector gear.

Ejected ice has a bad taste

Bad tasting ice is common when you use dirty water or the ice bin is dirty. To fix the problem you need to wash the ice bin and remove any old food that might be in the fridge. You should also replace the refrigerator’s water filter. You can do the work or hire a commercial appliance services Arlington to help you out.

Leave a Reply

Your email address will not be published. Required fields are marked *

Time limit is exhausted. Please reload CAPTCHA.