Monthly Archives: February 2019

Washer Repair: 7 Things That Can Destroy Your Washing Machine

A washing machine is an important household appliance. unfortunately, it tends to be destroyed by a number of items. Here are some of the things that can destroy your unit as given by washer repair professionals:

Zippers

Zippers have a number of ways in which they can destroy your washing machine. If they are large, they can catch in the wash machine’s drum, destroying it in the process. Regardless of their size, they can scratch the doors of the washing machines, giving them an ugly look.

If you have a modern unit that features a glass panel, the panel can easily explode due to the constant scratching. For you to avoid damaging your machine, you should always pull away all the zippers that might be in place.

Bras

They are regarded as delicate and on first look they seem harmless but they are very dangerous. The bras can be rough even on the toughest washing machines. The damage often comes from underwires that damage the drum.

For you to protect your machine from the wrath of the lady things, you should consider hand washing the pieces. You can also place the lingerie in a specially-made mesh bag then place them in the washing machine.

If you don’t have a unique bag, consider using an old pillow case. Remember to knot it at the end so that the delicates don’t pour out.

Cold water

When you clean your clothes with cold water you save a lot of energy, you reduce the shrinking of the clothes, and the fading of the natural fibers. While this is the case, hot water has been shown to reduce the efficiency of the machine.

You might get away with cleaning the clothes with cold water for some time, but you will be damaging it over the long run. For you to keep it functioning optimally, you should make a habit of running a maintenance cycle every now and then.

This calls for you to set the washing machine to the hottest temperature then add a cup of vinegar. You should then put the washer through its paces in order to descale and remove any mineral deposits. For you to keep your washing machine in great condition, do this at least once a month.

Coins

Just like zippers, coins batter against the washing machine’s drum and glass door. Since they are heavier, their impact is even severe. For you to protect your washer, make a habit of checking the pockets of all your clothes before you toss them in the washing machine.

If the washing is being done by someone else, remind them to check the pockets when they are doing the laundry.

Too much detergent

You need detergent to clean your clothes but too much of it is harmful. When you use a lot of it, you leave your clothes dingy due to the leftover soap residue. In some cases, the excess detergent has been shown to damage the sensitive control panel.

The right way of doing this is to check the user’s manual and see the amount of detergent that is optimal for your washing machine. You should never us more detergent that your machine can handle.

Wet clothes

It’s not uncommon to find people leaving their wet clothes in the washing machine after running a cleaning cycle. This is wrong. This is because it tends to lead to unpleasant odors in the machine.

It has also been shown to lead to the development of mold in both clothes and the washing machine.

Once you are done with your washing, you should remove the finished loads from the machine and put them on the line.

In the event you can’t dry the laundry immediately, place the clothes in a plastic laundry basket. Remember to place the basket in a ventilated area in order to avoid smells and mildew.

Overstuffing the machine

Different washing machines have different capabilities and sizes. Some homeowners want to finish doing their laundry as fast as possible hence they overstuff their machines.

This is wrong as it leads to the machine overworking. Appliance repair Northern VA professionals observe that this also leads to a reduction in the life of the machine.

For you to be on the safe side, you should never stock your machine more than it can handle.

Washer Repair: 5 Ways You Are Hurting Your Washing Machine

appliance repiar

While washing machines have been around for a long time, washer repair professionals report that many homeowners do a number of things to their machines that leads to them developing problems. Here are some of the things you might be doing wrong with your washing machine:

You don’t check your pockets before you run your laundry

You need to simply shove the dirty clothes in the washing machine and it will do it’s work, right? Wrong. You need to inspect the pockets of your dirty clothes before they go into the washing machine.

This is because coins, keys, and other metal objects can get into the washing machine and damage the outer tub and inner drum of the machine.

The coins and metal objects have also been shown to damage the clothes, lead to a leaking washing machine, and other issues.

For you to avoid the issues brought about by the coins, you should carefully check the pockets of all shirts, pants, and jackets before you put them in the washing machine. To be even safer, you should check the pockets before you put the clothes in the hamper.

You put too many clothes in the machine

Putting a lot of clothes in the washing machine might sound like a good idea as you minimize the loads of laundry that you have to do, but it isn’t. There are plenty of dangers that come with overloading your washing machine.

When you overload the machine, you damage the clothes as the zippers and buttons can catch on the garments. Overloading also leaves your clothes dirty as the detergent can’t circulate well enough when the machine is full.

In some cases, small clothing items such as socks get sucked into the drainage line of the machine which leads to a blockage that not only brings about inconvenience, it also tends to be expensive to get rid of.

When you overload the washing machine, you put a lot of weight on the machine. The extra weight puts a strain on the washing machine’s motor to the extent where it’s damaged.

To avoid the complications that come with overloading the washing machine, you should load it with just enough laundry. If you aren’t sure of the right amount of clothes you should put in the washing machine, read the instructions given by the manufacturer.

You put the lingerie in the washing machine

While putting your bras and underwear in the machine will save you time, it often leads to their damage. This is because the errant wires and hooks catch other pieces of clothing, damaging them in the process. The hooks and wires also tend to damage the insides of the washing machine.

The best way of going about it is to keep the delicates out of the washing machine—you should wash them by hand instead. If you don’t have time to clean the pieces by hand and you have to use the washing machine, put them in a mesh bag to avoid the damage.

You use a lot of detergent

You might have the impression that using a lot of detergent will lead to clean clothes, but this isn’t the case. In fact, it has been shown to have opposite effects. Too much detergent leaves a film on the clothes, increases the lint levels, and causes damage to the washing machine.

Sometimes you might use too much detergent by accident. This often happens when the caps of the detergent bottles make it hard for you to see the amount of detergent that you should use.

For you to avoid using too much detergent, you should be cautious of how you measure it. If it helps, you should make a line on the measuring cup so you don’t overdose on the detergent.

You don’t clean the washing machine

Did you know that you need to clean the washing machine even though its designed to clean your clothes? Your machines requires an occasional deep clean and scrub. Appliance repair Alexandria professionals report that regular cleaning of the machine prevents it from running efficiently which ensures that it lasts for a long time.

Regular cleaning also prevents weird smells from coming about and affecting your clothes. When you regularly remove soap residues and mineral buildup, you keep your appliance and clothes in better shape.

Dishwasher Repair: Common Dishwasher Problems And How To Fix Them

Just like any other appliance, the dishwasher develops problems that you should fix as fast as possible. Here are some of the most common dishwasher problems as given by dishwasher repair professionals:

Failure of the dishwasher to clean properly

A dishwasher is meant to clean the dishes; therefore, when it’s not doing it, you can’t call it a dishwasher anymore, can you? The unit will fail to clean the dishes when it’s dirty. You should check the strain screen, sprayer arms, and door gaskets for any food particles, grease, and other forms of debris that might be there.

If there is any form of dirt, get rid of it as soon as possible.

You also should consider running a cleaning cycle using a dishwasher cleaner to see whether it will work.

The unit might be failing to clean the dishes properly due to low pressure spray arms. Work with your contractor who will inspect the arms and fix them if having any issues. The arms should move freely without any obstruction. If the arms are worn out, you have no way out, other than to replace them.

Appliance repair experts report that the problems could be as a result of problems with the upper discharge housing gasket. You need to inspect it and find out whether it needs tightening or replacement.

In some cases, the problem is due to the use of a poor quality detergent and for you to fix the problem you only need to use a high quality detergent.

Noisy dishwasher

While the unit should make some noise when working, it shouldn’t be making noises that you are uncomfortable with. When the unit is making a lot of noise, you might be having a defective pump, wash arm seal, or bearing ring. All of these parts are difficult to diagnose and fix if you don’t have the necessary skills; therefore, you should hire a professional to help you out.

In some cases, the problem is due to spray arms that aren’t turning properly and they may be hitting the racks and dishes. In such a case, you need to replace them.

Failure of the dishwasher to drain

A properly functioning dishwasher shouldn’t have any water remaining after you have cleaned the dishes; therefore, when the unit isn’t draining, you have a problem that you should address. A dishwasher that isn’t draining tends to hold your dishes hostage and cause flooding in the kitchen.

You should inspect the assembly and check valve in the drain sump. If it’s not moving properly, replace it. You also should consider updating the drain pump and motor. If there are any obstructions for solenoid and drain flapper, get rid of them.

Leaking dishwasher

There is nothing as disgusting as this and it’s one of the problems that many people dread. This is because it tends to cause serious damage to the house.

When you are having this problem you need to check the drainage hose for any cracks and other forms of damage that might be there. You also should pay attention to the defective pump seal or pump. If necessary, change the seal and replace the pump.

A faulty door gasket will also cause the problem. You should find out whether it has become brittle or isn’t sealing the door as well as it’s supposed to. If you notice issues with it, replace it so that you can have a better fit.

Failure of the dishwasher to start

You will put the dishes in the unit for cleaning, but the unit will simply fail to start. when you are having this problem you should take a look at the fuses and circuit breakers to ensure that they haven’t blown or tripped.

You also should confirm that the unit is properly plugged in. In some cases, dishwashers fail due to a faulty door latch or door latch switch. If the door isn’t properly closed, it’s bound to prevent the dishwasher from starting; therefore, you should confirm that its properly closed.

If the latch is working well, commercial appliance repair Northern VA professionals recommend that you check the electronic control or timer and confirm that it is in good condition.