A properly functioning water heater is of paramount importance to you as a business owner. To keep the unit functioning optimally and avoid regularly hiring a commercial appliances service professional, you should properly maintain your water heater. To help you out, here are some of the things you should do:

Undertake mini flushes

To remove dust and sediments from the bottom of the water heater, you should flush the unit. To do it you should place a bucket under the drain valve located near the bottom of the water heater tank and turn the valve in a counter-clockwise direction. By doing this, you will release a few gallons of water thus getting rid of dust and other materials that would have put your unit at the risk of developing problems. To keep the unit in the top working condition, it’s recommended that you undertake full flushing. Here you will have to shut down the entire system and hire a professional to help you out.

Undertake regular inspections

Just like any other unit in your premises, you have to inspect the water heater regularly. One of the areas you should pay attention to is the temperature and pressure relief valve. This valve is of grave importance when it comes to the safety and proper functioning of the water heater.

You should lift it up on the lever part then allow it to snap back rapidly. If it’s working correctly, commercial appliances repair professionals report that you should be able to hear a gurgling sound as the valve allows water to be released into the drain tube. If you don’t notice any change, the valve is damaged.

Another thing you should do is to check the temperature setting regularly. You should go to the setting dial on your unit and check them. If too high, you should lower them to protect the water heater from overheating. For the ideal functioning of your unit, you should set the temperature to between 115 and 120 degrees Fahrenheit.

Conclusion

These are some of the ways of maintaining your water heater. Even with the best maintenance practices in place, it’s common for the unit to develop problems. When this happens, you should hire an experienced professional to undertake water heater repair Arlington. Some people try fixing the unit on their own, but this shouldn’t be you. While the problem might be minor, you might do the wrong things thus end up damaging your appliance.