8 Mistakes You are Making with Your Dishwasher

By | April 30, 2023

A dishwasher is one of the most commonly used kitchen appliances, and it saves you time and effort when dishwashing. 

To keep your dishwasher running smoothly, you must avoid making dishwasher mistakes that households make daily.

The mistakes you should avoid, as given by appliance repair professionals, include: 

You don’t read the instruction manual.

Many people have the impression that every dishwasher is the same. Due to this, they don’t bother reading the manual for their specific model as they think it’s unimportant.

Each dishwasher has a slightly different set of needs and ways of working.

One example is the type of things that each device can handle. When you don’t read the owner’s manual before using the appliance, you won’t know the items you can clean using the unit and those you can’t.

To stay safe, read the instructions before putting the different items in the dishwasher. 

Don’t put anything in the dishwasher if the manufacturer doesn’t say that it can go in.

Failing to run hot water beforehand

You might miss out if you don’t run your hot water tap before using the dishwasher. This might sound strange, but it’s true.

Running hot water before you start to use the dishwasher can ensure that the water going into the dishwasher is already hot, which can help it clean better.

Cold water can leave behind leftover soap and food. To stay safe, turn on the hot water at the sink and let it run for a few minutes.

Failing to leave the door open after a cycle

Just like with a washing machine, you should leave the dishwasher door open after using it so it can dry properly.

This is a great way to avoid mold, especially on the caps.

While this is a great practice, in most cases, many homeowners don’t do it often because they don’t know it’s the right thing to do. Others don’t know that they should do it. 

To stay on the good side, make it a habit to leave the dishwasher door open after running a cycle.

Overusing the eco mode

Eco mode or energy saver mode on your dishwasher can only be good for you and your appliance, right? Well, this is not true. Even if the mode saves energy by running at lower temperatures, setting your dishwasher to only run on eco mode could be a mistake that could hurt you in the long run.

Some people only use the eco or energy saver mode on their dishwashers because they think it would save them money and be better for the environment. Unfortunately, this isn’t always the case.

Running your unit only on eco mode could cause problems because the water might not get hot enough to dissolve all the soap. Soap can build up over time, leading to problems like leaks and damage to the dishwasher.

To prevent this, occasionally use the dishwasher’s highest temperature setting to keep it clean and ensure soap doesn’t build up.

Overloading the dishwasher compartments

One of the most common mistakes homeowners make when using their dishwashers is to put too many dishes, pans, glasses, and silverware in them.

Why does this matter so much? If you put too many things in your dishwasher, it won’t clean as well as if you left more room between them. Overloading your dishwasher can make your dishes have a foul smell and less clean.

To avoid this, load your dishwasher correctly, leaving enough space between the dishes so the water and soap can move around properly during the cleaning cycle.

Failing to clean the dishes

Some experts advise that you don’t need to clean your dishes before putting them in the dishwasher, but this is controversial.

You should know that your dishwasher isn’t a trash can or a garbage disposal. This means that you shouldn’t allow all the trash to get there. 

One of the biggest mistakes you can make when using the dishwasher is failing to scrap off bigger bits of stuck-on food or sauce, as these leftovers could linger.

Even though dishwashers are made to clean dishes, you should still scrape and rinse dishes before putting them in the dishwasher. If you don’t do this, bits of food will get stuck in your dishwasher and won’t clean your dishes.

This means you’ll have to clean your machine more often in the long run.

You don’t need to pre-rinse your dishes, but you should scrape off any stuck-on food. This way, you have fewer food particles getting into your dishwasher. 

Failing to clean the filter

It’s easy to forget or not even know that the dishwasher has a filter, but it does, and it does a great job of keeping your dishes clean by filtering out dirt and waste.

A dirty filter could be why your dishes come out of the washing with a film on them, and your glasses look cloudy.

Because of this, you need to clean it regularly. How often you clean it will depend on how often you use your machine. Once a week is suitable for some homes, but once a month is good for others.

You should research and find out the best time to do it. It also doesn’t hurt to consult an experienced dishwasher repair Springfield professional.

Failing to clean the dishwasher deep

Even though you should clean the filter often, you should also deep clean the dishwasher every so often.

You can do this by running a dishwasher cleaner or a bowl of white vinegar on the bottom shelf while the dishwasher is empty.

Doing this eliminates the limescale, food, and grime that have built up in your dishwasher.

It will keep your dishwasher from getting smelly, make sure your dishes get clean, and make the machine work better.

For the best outcome, deep clean your appliance at least once a week. You can do the cleaning yourself, but if you don’t have the time or aren’t sure about your skills, let an expert do it.

Leave a Reply

Your email address will not be published. Required fields are marked *

Time limit is exhausted. Please reload CAPTCHA.