Water Heater Repair: Taking A Look At The Common Water Heater Problems

By | September 28, 2017

water heater repair

To keep the water in your place of work hot, it’s paramount that you have a fully functional water heater. Unfortunately, just like the other units, it develops problems that you must have them fixed as soon as possible to restore serenity in your workplace. Here are some of the most common water heater problems and how to undertake water heater repair:

Leaking pipes

Leaking pipes are brought about by many factors such as: age, loose drain valve, poor maintenance, bad plumbing, and too much tank pressure. To fix this problem you should hire a repair professional, but if you have the skills, you should do it on your own. To repair the leak, you need to shut off the water supply and the electrical or gas supply to the tank.

You should then remove all the water from the tank and fix the leak. If the valve or the system is too old, you have no way out other than to replace it.

Noises

It’s also common for the malfunctioning water heating unit to make weird noises. Commercial appliances repair professionals report that the main reason for the sounds is the collection of sediment at the bottom of the water heater. The noise comes about when the hot water bubbles up through the sediment. Due to this, you have a popping sound.

To fix this problem, you only need to get rid of the sediment by cleaning the tank. To prevent a similar problem from coming about, flush the water heater periodically. You also should consider installing a water softener in your home. Experts report that the softener tends to eliminate the sediment that builds up in the tank.

Inadequate hot water

When you are installing a water heater, it’s recommended that you install one that will give you water that is enough for your guests. In some cases, your water heater will fail to give you enough hot water. One of the primary reasons for this is the recent upgrade of your tub to a larger one. You will most likely have this problem if install a spa type of tub.

The problem is also common if you recently changed your showerhead to a higher flow model. This would cause you to run out of hot water. Another reason is the location of the faucet. If it’s located at a long distance from the water heater, you will have a problem as the water will be required to travel a long way to the faucet head. To fix commercial appliance Fairfax, you will have to hire an experienced professional.

Leave a Reply

Your email address will not be published. Required fields are marked *

Time limit is exhausted. Please reload CAPTCHA.