Tag Archives: commercial dishwasher company

Dishwasher Repair: 5 Valuable Dishwasher Cleaning Hacks

Since you use the dishwasher for cleaning, you don’t need to clean it, right? Wrong. Like other kitchen appliances, you need to clean your dishwasher to keep it in top working condition. How do you do it? Here are valuable dishwasher cleaning hacks as given by dishwasher repair experts:

Run a cycle with white vinegar

Do you live in an area with hard water, and you have noticed your dishwasher building up mineral deposits? You should run a cycle with white vinegar. Put two cups of white vinegar on the top rack then run a complete cycle without adding dishes or detergent.

The vinegar will remove the trapped particles, detergent residues, and built up minerals, so the dishwasher looks and functions as good as new.

To prevent the deposits from coming about, make it habit to run the cycle once every three or four weeks.

Remove built-up food and debris with a steam cleaner.

Got built-up food and debris in your appliance? You should try removing them using a steam cleaner. After preheating the appliance, use the steam cleaner to clean the insides of the dishwasher. Focus on cleaning the corners and hinges as well as the sprayer holes and tracks.

Use the brush attachment to remove built-up material, ensuring you don’t scratch the machine. If your appliance has hard to reach tight areas, use a steam cleaner along with an old toothbrush.

For a deeper clean, use a multipurpose spray along with the steam cleaner. Once you are done with the steam cleaner, run a short cycle to rinse out the dishwasher.

Clean the filters

Your dishwasher most likely has a trap at the bottom to catch large food particles, preventing them from washing down the drain. The dishwasher filter is the same in most appliances where it resembles a mesh screen that you can take out, shake it off and rinse.

It also resembles a grate above the drain hole. If you have a more modern appliance, you could be having a device that catches the food particles the same way. You should remove, clean, and replace it.

To clean the filter, you need to shake it out over the trashcan and rinse it under the sink. If you are still unsure where to find the dishwasher filter, check around where the water seems to drain.

Pay attention to the spray arms.

If your home taps bring in hard water, chances are there is a lot of mineral buildup around the spinning parts of the machine that spray water. To clean the spray arms, use a pipe cleaner around the holes. If the mineral buildup is substantial, soak the arms in vinegar.

Be cautious, moving the dishwasher arms as they aren’t designed to move easily. Sometimes you have to remove them entirely to give them a good clean.

Get rid of smell using baking soda.

Baking soda is not only effective at cleaning the dishwasher, but also at deodorizing it. Have you noticed a unique smell in your appliance? Consider getting rid of it with baking soda.

Before you apply the baking soda, ensure the dishwasher is already clean. You should then remove the racks and remove any gunk or food residue present. Can you remove the drain? Remove it and give it a thorough cleaning.

You should then measure one cup of baking soda then sprinkle it across the bottom of the dishwasher. Follow it up with a short cycle on the hottest setting possible. If you have done it right, your appliance will have a fresh smell and look brighter.

You don’t need to run another cycle after using baking soda. Continue using the dishwasher as you normally do.

If you don’t want to go through the trouble of cleaning using baking soda, place one lemon peel in the basket cutlery, and it will fight the bad smell.

Remove rust from the latch.

If you have had your appliance for a couple of years, chances are the latch has begun to get a little rusty. To fix it, rub it down with a stainless steel cleaner and steel wool. Appliance repair Northern VA professionals advise you to rinse the latch and buff it dry with a cotton cloth.

To complete the look, coat the latch with clear fingernail polish. This will waterproof the metal and prevent rust from coming about.

Dishwasher Repair: 7 Ways To Keep Your Dishwasher In Top Shape

dishwasher repair

The dishwasher is one of the modern appliances that make life easy. Unlike most of the appliances in the market, the dishwasher is easy to maintain. According to dishwasher repair professionals, some of the proper dishwasher maintenance practices include:

Keep it level

A dishwasher should be level. If it isn’t, it could leak. For you to tell whether the unit is level, open the door and place an air-bubble level along the edges. If the dishwasher isn’t level, raise or lower either side by adjusting its “feet.” You can also add a wedge to balance it correctly.

Inspect the sprayer arms for clogs

When you go for a long time without cleaning it, food particles, mineral deposits, and other debris are bound to clog the holes in the sprayer arm. For the dishwasher to function more efficiently clean these small holes.

At least once every month, remove the sprayer arm and soak it in warm vinegar to loosen any obstruction. You should then clean out each spray hole with an awl or pipe cleaner.

Check the gaskets for cracks and other signs of damage

Gaskets are rubbers of plastic seals you find along the dishwasher door. Their purpose is to provide a water-tight seal when you close the doors.

Signs of faulty gaskets include water around the dishwasher. If the gasket is damaged, remove it by unscrewing it using a screwdriver. You can get a replacement gasket from a hardware store. You can also order one from a manufacturer.

Before you install the new gasket, soak it in hot water to make it more flexible.

Check and clean the screens and filters

Each dishwasher has a screen or filter located above the food drain. Its purpose is to catch large food and debris. For you to prevent clogs from coming about, clean it regularly.

If you have never cleaned it before, take a look at the owner’s manual for instructions on how to go about it. If you inspect the filter and it has holes, you have to replace it to avoid harming the other parts of the dishwasher.

While you are at it, also inspect and clear out any food or debris that might be trapped in the food drain.

Keep the dishwasher plugged

Plenty of accidents have been reported when dishwashers electrocute homeowners. Dishwashers have inbuilt water heaters and motors that consume a lot of electricity. The unit also uses a lot of water. If the unit isn’t properly wired, you are at more risk of being electrocuted.

For you to be safe and protect your family members from any danger, you should plug the dishwasher into a grounded outlet.

Watch out for the socket you connect it to. As a rule of thumb, ensure that it’s rated adequately to handle large loads that are required by most dishwashers.

Watch the water temperature

The temperature of the water greatly determines how efficient the dishwasher is. To improve the efficiency of the unit, reduce the amount of hot water you need to clean the dishes.

Studies show that up to 80% of the energy goes into heating the water. If the water is too cool, it doesn’t clean the dishes as well as you should. If the water is too hot, you end up wasting a lot of energy.

Set the water temperature at 130 degrees Fahrenheit. Water at this temperature will effectively remove all the food particles and residues without wasting a lot of energy. Place a thermometer inside the dishwasher. If above or below 130 degrees, adjust the hot water heater.

Use the right detergents

Not all detergents and soaps are designed for dishwashers. Wrong detergents produce large amounts of foam, suds, and bubbles that leak from the dishwasher and spill onto the floor.

For you to be safe, use detergents and soaps designed for dishwashers. Appliance repair Alexandria professionals recommend that you use powder detergents instead of gels. This is because gels contain chlorine bleach that has been shown to dissolve seals and gaskets.

Gels also don’t work well with hard water. They also clog the detergent dispenser thus impeding the cleaning performance. Gels also leave more spots and cloudiness on glassware so that it looks dirty after removal.

Dishwasher Repair: Guide On How To Fix Dishwasher Problems

dishwasher repair

When many people notice problems with their dishwashers, they think they are doomed and have to invest in new appliances. Far from this. Eighty percent of dishwasher problems can be fixed without requiring you to hire a dishwasher repair professional. To help you out, here are tips on how to fix the common dishwasher problems:

Failure of the dishwasher to start

How long have you had your dishwasher? If you have had it long enough, you must have come across this problem. In 90% of the cases, the dishwasher will fail to start when you are having problems with the latch or door latch switches that supply power to the dishwasher controls.

When the door fails to close properly, the door latch switches aren’t activated thus the dishwasher controls don’t receive the power. As a consequence, the dishwasher doesn’t start. For you to fix this problem you need to confirm whether the door is closing properly and activating the switches. If it isn’t, fix it. If it is, take a look at the timer or electronic control.

Your dishwasher will also fail to start when the selector switch, motor start relay, or thermal fuse isn’t functioning optimally. If you have tried fixing all of these areas without success, it’s time to hire a dishwasher expert to give the appliance a look.

Noisy dishwasher

There is nothing that screams problem than a noisy dishwasher. While you might have the impression that fixing it is a challenge, it isn’t. In fact, you can fix it even if you have never done it before. In most cases, the dishwasher will make loud noises when you have a defective pump.

The pump sits at the bottom of the dishwasher and pressurizes the spray arms. It also drains water from the unit. Your appliance will make loud noises if the circulating parts of the dishwasher are malfunctioning.

Your appliance will also make noises when you are having issues with the wash arm bearing ring and spray arm seal. When these dishwasher parts wear out or get loose, they cause the spray arm to malfunction hence the loud noises.

For you to fix the unit you need to inspect the ring and seal. If necessary, replace them. While you are at it, also take a look at the spray arms and ensure they are turning freely without hitting the racks or dishes. Are the arms wobbly? The center portion or hub may be worn out. If this is the case, replace it.

Failure of the dishwasher to drain

You must have come across this problem. You clean the dishes then the water doesn’t drain, leaving the dishes wet. The most common cause of this problem is problems in the drain pump and motor.

Dishwashers have different ways of draining water. Some have single motor driven pump while others have separate drain pumps. The drain pipes often fail to drain due to obstructions. You should inspect them for obstructions and if present, remove them.

In some cases, the dishwasher will fail to drain due to problems with the check valve. The valve is designed to allow water to flow in one direction preventing dirty water from re-entering the dishwasher.

A tell-tale sign that the problem is due to a faulty check valve is water getting back into the dishwasher tub. You need to replace the valve to fix the problem.

Other reasons why your dishwasher might not be draining include: faulty belt, drain hose, and timer. If you have the skills you can fix this problem, but if you don’t consider yourself a handyman, hire a kitchen appliance repair professional to help you out.

Leaking dishwasher

While some dishwashers fail to drain, others leak thus they don’t give the dishes the clean look they deserve. This problem comes about due to a defective pump or seal. The role of the pump is to circulate water in the dishwasher; therefore, when it has a defect, the water is meant to leak.

For you to stop the leaking, find the faulty part of the dishwasher pipe and fix it. Commercial appliance repair Fairfax also report that the dishwasher will leak if there are problems with the door gasket, water inlet valve, spray arm, and dispensers. You should identify the source of the problem and fix it.

Commercial Dishwasher Repairs: Dishwasher Maintenance And Repair Tips

commercial dishwasher repairs

A dishwasher is an important unit for the success of your restaurant business. For you to take good care of it, you need to know about the most common problems that it faces and how to maintain it. To help you out, here is what you need to know about it as given by commercial dishwasher repairs professionals:

Common dishwasher problems

The dishwasher has two main problems: failure of it to clean the utensils properly and failure of it to drain properly. If you find that your dishes are still soiled after running a cycle, the unit might not be getting enough water. It also might not be getting any water at all.

You should take a look at the shut off valve of the sink and check if there is water. If water is present, your unit might be having three main problems: clogged spray hole, faulty internal water valve, or the water might be too hard.

If your appliance isn’t draining the water properly, you should check the air gap next to your sink’s faucet. The drain hose connected to the air gap tends to get clogged by food particles. You should clean them using your hands and then run a wash cycle to check whether the unit has unclogged.

How to maintain the unit

For you to prevent the dishwasher from developing issues you need to take good care of it. When you are loading the machine, commercial appliance services providers recommend that you remove all the food scraps from the dishes and rinse thoroughly. This aids in preventing food debris from clogging the filters.

Before you place the cups in the dishwasher, you should discard any coffee or tea residues that might be there.

Most of the dishwasher problems come about when you load the machine incorrectly. To be on the safe side, ensure that you load it according to the manufacturer’s instructions. Always avoid loading the unit such that you have protruding dishes.

This is because the protrusions tend to prevent the spray arms from rotating as effectively as they should. The protrusions can also prevent the soap dish from opening when the dishwasher is still running.

Conclusion

This is what you need to know about the dishwasher. In the event the unit develops issues, you should fix it as soon as possible. If the problem is minor, you can fix it by yourself but if complex hire commercial kitchen appliance repairs Alexandria to help you out.

Commercial Dishwasher Repairs: Expert Tips On How To Properly Maintain Your Dishwasher

commercial dishwasher repairs

Just like any other unit in your place of work, you need to take good care of the dishwasher. To help you out, here are tips given by commercial dishwasher repairs professionals on how to properly maintain the unit:

Take good care of the sprayer arms

The sprayer arms work by spinning, and their role is to ensure that sprayed water reaches all the surfaces of the dish. The dishwasher sprays water out of the unit using small holes that are located at regular intervals along the arms.

With time, these arms get clogged with dried soap and debris. To ensure that your dishes are clean all the time, you should regularly clean out the holes in the spray arms. The best way of cleaning them is soaking them in a solution of water and vinegar.

Get rid of food

The food that falls from the dishes collects in the trap at the bottom of the dishwasher. To get rid of dried soap and food particles, you should remove the trap and remove the food.

In addition to ensuring that bacteria and other microbes don’t grow in your unit, regularly getting rid of the food also ensures that the dishes are clean all the time.

To avoid dishwasher problems, remove the trap and remove any food that might have got there. You should do this at least once a week.

Fix the unit immediately

It’s common for the dishwasher to develop issues. In most cases, the problems are minor thus many business owners ignore them. This is wrong. You should note that when you don’t fix the problems as soon as they happen, you risk them getting worse to the extent the dishwasher stops working.

The best way of going about it is contacting a commercial kitchen appliance repairs professional as soon as you notice an issue. In addition to this ensuring that you have peace of mind when working with the unit, it also saves you money as the contractor charges you less for it.

While it’s good to hire a professional as soon as you notice a problem, you should note that not all issues require an expert—there are a few that you can fix on your own.

Conclusion

These are tips on how to properly maintain your dishwasher. In addition to the above tips, you also should make it a habit of hiring commercial appliance services Arlington to inspect the unit and fix any issues that might be present. You should do this at least once a year.