Commercial Microwave Oven Service: Common Microwave Oven Problems

By | August 30, 2017

appliance repiar

Just like any other appliance in your restaurant, the microwave also develops problems that you should have fixed as soon as possible. All you need to do is hire a commercial microwave oven service provider to fix them. While it’s recommended that you hire a professional to help you with the repair, sometimes the unit develops minor problems that you can easily fix on your own. To help you out, here are some of the most common microwave problems and how to fix them:

Failure of the unit to switch

This is a common problem that you will find in most electric units. The most common reason why your unit will fail to switch on is if it isn’t properly plugged in. If you notice that the unit doesn’t switch on, you should check the plug and ensure that it isn’t properly plugged in. You also should ensure that the door is properly closed and aligned.

The unit will also fail to switch on if the fuse has blown. In such a scenario, replace and reset the tripped circuit breaker. If the problem still persists, contact a commercial appliances repair professional to help you out.

Constantly blown fuses

In rare cases, you will find the microwave blowing the fuses or tripping the breaker more than its normal. In such a case, find the door switches and remove the leads. You should then probe the terminus using a volt ohm meter. If spoilt, replace it.

In some cases, the problem could be due to damage to the diode or capacitor. You should test the capacitor using a voltmeter to confirm it. The reading should increase gradually to infinity. You should then test again, and if the capacitor is in good condition, the readings should be the same. If they are different, it’s damaged and it’s time to replace it. If the capacitor is okay, the problem might be due to an underlying condition that you should have a commercial appliances service provider address.

Failure of the corousel to turn on

The corousel is driven by a small motor that is often not related to the heating function. To check the source of the problem, check the plastic drive coupling on which the tray is found. You also should check the ring and roll assembly. You should note that you have to open the microwave cabinet to fix it.

Conclusion

These are some of the most common problems with microwaves. For peace of mind that the unit has been properly fixed, seek a reputable commercial kitchen appliance service Fairfax.

Leave a Reply

Your email address will not be published. Required fields are marked *

Time limit is exhausted. Please reload CAPTCHA.