Commercial Ice Maker Maintenance Tips

By | April 29, 2017

commercial ice maker maintenance

All machines require some maintenance and repairs to help them run efficiently and give you proper service. If you own a commercial ice maker, you need to maintain it properly. To help you out, here are commercial ice maker maintenance tips you should observe:

Read The User Manual

A user manual gives detailed information about a product description and also shows you the different parts of the unit. You should read the user manual to know the attention that the various parts of the units require. You will also know how often you need to maintain your unit.

Maintain proper temperature

The room temperature should be above 10 degrees centigrade or 50 degrees Fahrenheit. This is to keep the ice maker running effectively without strain.

Install Water Filter

You should install a charcoal water filter in your unit to improve taste and odor of water used to make the ice. Studies by commercial appliances repair professionals show that water impurities tend to affect the taste of the ice; therefore, when you install the filter you get rid of impurities, and as a consequence, you maintain the taste of water.

Avoid Rusty Water

Rusty water is a health hazard as it can course illness. You should regularly inspect your tank and if the water is rusty, get rid of it.

Clean Water Reservoir

Due to mineral build up this raises a health concern. A user manual should be followed carefully for instructions on how to effectively clean the water reservoir

Sanitize The Unit

You should sanitize the ice maker. To avoid accidents, ensure that you do so after turning the unit off.  You should do the sanitization depending on the size of your unit and how often you use it.

Conclusion

When you are handling the unit you should be cautious and ensure that you always wear protective clothing. This is to protect yourself from injuries.  Cleaning is one of the essential activities you need to undertake. When doing the cleaning use lukewarm water. Also, refer to the user manual to know the location of the different parts.  You should use soft bristles or a sponge then rinse thoroughly with clean water.

In the event the appliance develops problems or requires specialized service, you should avoid repairing it on your own (if you don’t have the skills). The best way of going about it is hiring a commercial kitchen appliance repairs Falls Church to help you out.

Leave a Reply

Your email address will not be published. Required fields are marked *

Time limit is exhausted. Please reload CAPTCHA.