Monthly Archives: May 2017

Commercial Appliances Service: How To Troubleshoot Ice Maker Problems

Virginia Refrigerators Repair

Two of the most common problems with commercial ice makers are: production of thin or hollow ice, and failure to produce ice at all. Before you hire a commercial appliances service provider, there are some areas of the ice maker you should take a look it and try to fix the problems on your own thus saving yourself money:

Check the temperature

Sometimes the ice maker may not be producing enough ice due to high temperatures. For the unit to produce ice, the freezer’s temperature should be between zero and 10 degrees. When the temperature is above this range, the unit might be having problems removing heat thus the malfunctioning. In most cases, the high temperature is due to dirty condenser coils. Due to the accumulated layers, the coils are unable to release heat. If you don’t clean them in good time, they work harder than they should thus increasing the temperature.

To fix this problem, you should clean the coils. They are located beneath the refrigerator unit, and all you need is a piece of cloth to get rid of the accumulated dust. To avoid future problems, make it a habit to be cleaning them every 12-18 months.

Check the frost buildup

In addition to dust, it also common for frost to buildup in the evaporator coils. This happens when the system has a leak, or there is a restriction. You can hire a commercial ice makers repairs professional to help you open up the system and access the coils or do it on your own. When doing it on your own, follow the guides you find both online and offline. If you find that some coils have frost and others don’t, you should contact a professional to seal the leakage. If the frost isn’t due to leakage, find the restricting material and get rid of it.

Check the water pressure

There is no way the ice makers will produce enough ice if there isn’t sufficient water pressure. Check the pressure and ensure that it’s at least 20 PSI. All you need to do is test the water flow. If it’s weak, increase it.

Conclusion

These are tips on how to troubleshoot ice maker problems. Sometimes the problems are beyond your capabilities. In such a case, hire a commercial kitchen appliance repairs Arlington to help you with fixing the unit. As rule of thumb, work with an experienced expert.

Commercial Microwave Oven Service: How To Take Care Of Your Commercial Microwave

commercial microwave oven service

To avoid expensive commercial microwave oven repair, you need to take good care of your microwave. To help you out, here are tips on how to do it:

Watch what you put in the microwave

Microwaves are like humans—they are what you put in them. To keep your unit in top shape be cautious of what you put in it. Avoid anything that can destroy the unit. One of the things that should never see the inside of the unit is metal. Never place objects with metal trim, metal utensils, foil trim or metal containers in the oven. According to appliance repair professionals, when you put metal in the appliance you put it at the risk of catching fire.

Keep the microwave clean

Just like any other appliance in your home, you need to keep the microwave clean. In addition to keeping it presentable, cleaning the appliance also gets rid of any harmful micro-organisms that would destroy the unit. Food and liquid spatter also tend to absorb energy resulting in burn spots that cause damage to some of the microwave components. Get rid of any spots as soon as you notice them. Clean the messes with friendly materials such as wax paper and paper towels. Avoid dangerous materials such as aluminum foil, silver, or gold accents as they put the unit at the risk of catching fire and even exploding.

Watch the microwave door

According to commercial appliances repair professionals, the microwave door is one of the most abused parts of the unit. Some people slam it, others push it with the elbow, while others pull it open without first turning off the oven. When the microwave door is damaged, the microwave not only looks ugly, it also doesn’t heat the food as quickly as it should. A broken door also puts your unit at the risk of exploding. To keep your unit in top shape, you should watch how you open and close the microwave door. Be gentle in your working.

Never run the microwave empty

This often happens accidentally, and it results in severe damage to the appliance. When the microwave runs empty, the produced energy is absorbed by the components of the microwave. Since the components aren’t designed to withstand the exposure, they get damaged. If you accidentally put the unit on, commercial microwave oven service Fairfax recommend that you install a sensor in the microwave that will let you know when the internal components are getting heated.

Water Heater Repair: Tips On How To Maintain your Water Heater

water heater repair

A properly functioning water heater is of paramount importance to you as a business owner. To keep the unit functioning optimally and avoid regularly hiring a commercial appliances service professional, you should properly maintain your water heater. To help you out, here are some of the things you should do:

Undertake mini flushes

To remove dust and sediments from the bottom of the water heater, you should flush the unit. To do it you should place a bucket under the drain valve located near the bottom of the water heater tank and turn the valve in a counter-clockwise direction. By doing this, you will release a few gallons of water thus getting rid of dust and other materials that would have put your unit at the risk of developing problems. To keep the unit in the top working condition, it’s recommended that you undertake full flushing. Here you will have to shut down the entire system and hire a professional to help you out.

Undertake regular inspections

Just like any other unit in your premises, you have to inspect the water heater regularly. One of the areas you should pay attention to is the temperature and pressure relief valve. This valve is of grave importance when it comes to the safety and proper functioning of the water heater.

You should lift it up on the lever part then allow it to snap back rapidly. If it’s working correctly, commercial appliances repair professionals report that you should be able to hear a gurgling sound as the valve allows water to be released into the drain tube. If you don’t notice any change, the valve is damaged.

Another thing you should do is to check the temperature setting regularly. You should go to the setting dial on your unit and check them. If too high, you should lower them to protect the water heater from overheating. For the ideal functioning of your unit, you should set the temperature to between 115 and 120 degrees Fahrenheit.

Conclusion

These are some of the ways of maintaining your water heater. Even with the best maintenance practices in place, it’s common for the unit to develop problems. When this happens, you should hire an experienced professional to undertake water heater repair Arlington. Some people try fixing the unit on their own, but this shouldn’t be you. While the problem might be minor, you might do the wrong things thus end up damaging your appliance.

Commercial Dishwasher Repairs: Understanding The Common Dishwasher Mistakes

commercial dishwasher repairs

According to commercial appliances service professionals, most of the problems with kitchen appliances are as a result of preventable mistakes made by the business owners. One of the most commonly misused appliances in the kitchen is the dishwasher.

Common dishwasher mistakes

Using the wrong detergent: Most business owners know that they need to use a detergent for the dishes to be properly cleaned. Unfortunately, most of them use the wrong detergents. Using the wrong detergent tends to leave a film of soap on the dishes which results to unpleasant results. In some cases, it results in damage to the appliance. To be on the safe side, you should always use the right detergents. Also, remember to use them the right way.

Overfilling the dishwasher: It’s common to be tempted to stack a lot of dishes in the dishwasher especially when you are having a lot of people waiting in line in the restaurant. You should note that overfilling the unit not only puts a lot of pressure on the dishwasher; it also prevents the dishes from getting properly cleaned. The dishes also bump into each other resulting in cracks. To be on the safe side, you should insert the right number of dishes in your unit for cleaning. You should space the plates in such a way that you give each dish enough room to be adequately cleaned.

Including a lot of food: Most of the modern dishwashers have the ability to remove most of the food residues without the need of you prewashing the dishes. While this is the case, commercial appliances repair professional advise against leaving a lot of food on your dishes as it puts your device at a lot of pressure. For your unit to continue working efficiently for a long time, you should scrap off all the necessary food items from your dishes before you put them in the dishwasher.

Blocking the sprayer: The sprayer provides water to clean the dishes. For your dishes to be clean, you should always ensure that the sprayer can reach all the corners of the dishes. One of the things that block the sprayer is a large bowl or pan. When you have a blocked sprayer, the dishes don’t get properly cleaned. To avoid this, you should always double check the sprayers and ensure that they aren’t blocked before you start the dishwashing cycle.

Conclusion

These are some of the mistakes that you can make with your dishwasher. The errors result in unpleasant experiences while others cause damage to your dishwasher. To avoid seeking commercial dishwasher repairs Arlington now and then you should properly use the unit.